632CI BBC 1800HP Nitrous Race Engine

632ci 1800+HP Pro N2O Race Engine


4.600″ Bore | 4.750″ Stroke | 6.700″ Rods | 1800HP @ 6800 rpm

Actual Dyno of 2 stage 632


  • Merlin III Splayed Cap CNC Race Prepped Block
  • Specific Fit Head and Inner Valley Stud Kit Plate Honed w/Block
  • Oring Block w/.041″ Stainless Steel Wire on Perfect 4.840 Bore Centers
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Callies Dragon Slayer Series Internally Balanced Crank
  • Oliver Steel I Beam Severe Duty Nitrous Rods
  • Clevite or King “HP” Race Series Main and Rod Bearings
  • Wiseco Big Hit N2O Gas Ported Coated Skirt Pistons
  • Tool Steel .220″ Thick Wall N2O Wrist Pins
  • Total Seal Stainless Steel Nitrous Rings
  • AwesomeEngines® Comp Cams 7/4  Swap Nitrous Steel Billet Cam
  • Cloyes True Roller w/Torrington Bearing or Quiet Gear Drive System
  • Comp Cams .904″ HIPPO Extreme Duty Roller Lifters
  • ATI Super Dampener w/Billet TDC Pointer
  • Head Hunter MC 395cc Fully CNC Ported Heads
  • Brodix 2.400 x 1.850″ Severe Duty Valves
  • Pacaloy Triple Springs w/ Titanium Retainers
  • SCE Copper Head Gaskets w/Receiver Grooved Heads
  • Manley 7/16 x .165″ Wall Severe Duty Push Rods
  • Crower Stainless Steel or T&D Shaft Rocker System Installed
  • AwesomeEngines® CNC Black and Red Logo Powder Coated V/Covers
  • Moroso Billet Aluminum 22163 Oil Pump
  • Moroso 21047-9 Pro Eliminator Pro Series Pan
  • Brodix BM2017 CNC Ported Intake w/Jomar Spacer
  • Holley Ulta or QFT 1250cfm N2O FX Series Carburetor
  • MSD 84697 Distributor, Moroso Wires w/NGK Race Plugs
  • Nitrous Express RNC Plate System Installed
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Raised .600 Cam Special Race Block w/Wide Oil Pan and 54mm Camshaft (will require Jesel belt drive $1295)
+ $  995.00
Brodix or Dart Aluminum Block Fully CNC Blue-Printed Race Prepped w/Special Stud Kit
+ $3495.00
Callies Magnum Internally Balanced Crank (magnum will require heavy metal)
+ $  595.00
GRP Billet Aluminum Pro Mod Rods Installed (additional clearance is required)
+ $  275.00
Precision .300 x .250 Taper Wall Wrist Pins (used for 2 stages or 600+hp, will require more heavy metal)
+ $  195.00
Titanium Intake Valves Installed
+ $  795.00
Titanium Exhaust Valves Installed
+ $  795.00
Moroso 22167 Billet Gerotor Oil Pump Installed
+ $  125.00
20385 Moroso Pro Eliminator Aluminum Oil Pan
+ $  295.00
Moroso Complete External Oil Pump w/Special 20385 Aluminum Revised Oil Pan w/Special Pickup Installed
+ $  995.00
Moroso Complete 5 Stage Dry Sump System Installed
+ $2995.00
Moroso Accumulator System Installed
+ $  395.00
Moroso New Vacuum Pump System w/Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1095.00
2nd Stage NX 200-600Hp Shark Nozzle System Installed w/L-250 Low Amp Solenoids (tool steel rings and pins included w/up to 2200Hp)
+ $1795.00
CV Products Made in the USA Starter, Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $  325.00
“PRO DADDY” 2000HP Brand New Loaded PowerGlide Built for this Application
+ $3895.00
10″ Custom N2O Torque Converter w/Steel Stator Custom Pump and Turbine Built for 2000+HP
+ $1495.00
New Complete EZ EFI 2.0 System Dyno Tuned and ready to Race. Complete Nitrous Ready
+ $2495.00

Dyno T&T • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.