632ci BBC Magnum Short Block

632ci Big Block Chevy Magnum Short Block

$8,995.00

Dart Big M or World Merlin III, Your Choice, 10.200 Deck x 4.600″ Bore, CNC Perfectly Blue Print Machined Splayed Caps Race Block   • Cam Bearings, Stainless Steel Freeze Plugs • Professionally Assembled w/Rotator Listed Below

 

Callies Magnum U.S.A 4.750″ Internally Balanced Steel Crank ­ ­• Oliver Steel I Beam 6.7″ Rods • Wiseco 15:1 Quick 16 – 24° or Quick 8 Big Chief 18°-14°or 12° Gas Ported Coated Skirt N2O Pro Series Pistons • .180″ Wall Steel Pins • Total Seal Stainless Steel 043-043-3mm Rings • King “HP” Main and Rod Bearings • Double Lip Rear Main Seal

Optional Equipment

Either Block Requested w/a Steel Billet Cap Option
+ $ 450.00
Dart Race Series Raised .600″ 54mm Cam w/.904″ Lifter Bores Fully CNC Race Prepped on Our Centroid Block Machining Center
+ $ 795.00
Dart Raised Cam Aluminum Fully CNC Race Prepped on our House Centroid Block Machining Center
+ $3995.00
Brodix Raised Cam Aluminum Block w/55mm Cam Bearings and .904″ Lifters
+ $4295.00
Callies Magnum Series Internally Balanced 4340 Crank Shaft w/2.100 Rod Journal (heavy metal from $100 per slug if needed)
+ $ 195.00
Callies Magnum XL 4340 Internally Balanced Included in Cost of Upgrade and Crank Shaft Weighs 59lb w/2.200 Rod Journal
+ $1395.00
GRP Billet Aluminum Rods (extra clearance is required but included in price)
+ $395.00
Callies I Beam Ultra Rods
+ $ 195.00
Total Seal Tool Steel Nitrous Extreme Duty .043 Top Piston Ring Set
+ $ 195.00
Tool Steel .220″ Wall Wrist Pins (will require heavy metal @ $75 per slug needed)
+ $ 75.00
Camshaft Kit Below; 55mm add $150 to Price; Raised Cam Timing Set and Timing Cover add $200 to Price
+ $ 695.00
Deluxe Short Block Kit Below w/Pro Eliminator steel Oil Pan, 7/4 Swap Cam, ATI Damper; 55mm add $150, Timing set / Cover add $200
+ $1875.00
Fel Pro MLS Head Gaskets (pair only)
+ $ 195.00
ARP Head Stud Kit Used For Plate Honing the Block Steel or Aluminum Set (from)
+ $ 245.00
Dart Inner Valley Stud Kit
+ $ 90.00
Comp Cams HIPPO Roller Lifters
+ $ 595.00
Heavy Metal to Internally Balance (starting from $100.00 per slug needed to balance up correctly)
+ $ 100.00

Cam Shaft Kit

  1. Comp Cams .825″ Lift 7/4 Swap Steel Billet Roller Camshaft (55mm add $150)
  2. Cloyes True Roller Torrington Bearing (+.400 set and cover add $200)
  3. Degree Cam Shaft to Proper Specifications
  4. Install Chrome Cover and Set End Play
  5. Comp Cams Camshaft Button
  6. Comps Cams Lock Plate

Deluxe Short Block Kit

  1. Comp Cams .825″ Lift Steel 7/4 Billet Roller Camshaft Your Choice Kit Above!
  2. Solid Polished Aluminum Timing Cover Installed and Cam End Play Set
  3. ATI Super Damper Steel Balancer TDC Verified and Installed
  4. CNC Billet Adjustable Timing Pointer TDC Verified & Set
  5. Moroso 22185 HV Oil Pump w/Tig Welded Pick Up
  6. Moroso #21047 Eliminator Oil Pan and Kick-out
  7. Timing Cover and Fel Pro Oil Pan Gaskets
  8. Raised +.400″ Timing Set & Timing Cover add $200 to kit
  9. Moroso 20385 Aluminum Oil Pan add $275 to kit
  10. Moroso 22163 Billet Oil Pump add $275 to kit
  11. 55mm Solid Roller Cam add $150 to kit
  12. Comp Cams Belt Drive add $895 to kit

Short Blocks Come w/Blue Print and Balance Sheet as well as all Product Information, Stickers and Contingency Information

Comments are closed.