638ci 1075HP Big Block Ford Pro Bullet Race Engine

638ci 1075Hp BBF Pro Bullet Race Engine

$20,975.00

10.300″ Deck | 4.700″ Bore | 4.600″ Stroke | 6.700″ Rods | 1075Hp @ 7200RPM

Components

  • Ultra Eliminator Billet Splayed Cap Race Block
  • 12 Point Head Stud Kit Plate Honed w/Block
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • 4.6 Stroke Internally Balanced 4340 Steel Crank
  • K1 or Manley Steel H Beam Rods with ARP2000 Bolts
  • King “HP” Series Race Main and Rod Bearings
  • Diamond JE or Wiseco 15.25:1 Pistons with .043.043 3mm Rings
  • .180″ Wall 1400Hp Steel Wrist Pins
  • Total Seal Stainless Steel, TNT or Hell Fire Piston Rings
  • Comp Cams .900″ Solid Roller Camshaft
  • Comp Cams HIPPO Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set
  • New Timing Cover and TDC Billet Pointer
  • ATI Super Dampener (best in the business)
  • TFS-5451T804-C03 A460Fully CNC Ported 360cc Heads
  • TFS 2.400 and 1.88 Intake and Exhaust Stainless Steel Valves
  • Pac Triple .900″ Springs with Tool Steel or Titanium Retainers
  • Cometic MLS Severe Duty Racing Head Gaskets
  • Manley 7/16 x .165″ Wall Push Rods
  • Jesel or T&D 1.7/1.7 Pro Series Shaft Rocker System
  • AwesomeEngines® Custom Valve Covers
  • Melling M84HDV Blue Printed Oil Pump Kit
  • AwesomeEngines® Moroso 8 Qt. Stroker Oil Pan
  • TFS 4500 1×4 Match Ported and Cleaned Up Intake Manifold
  • Jomar Special CNC Ported Spacer
  • Holley Ultra or QFT Black Diamond 1450cfm FX Series Carburetor
  • MSD Pro Series Billet Race Distributor, Wires and NGK Plugs
  • Free 48 State Freight

Available Upgrades

Callies 99QH29MG Magnum Series Internally Balanced Crank Shaft (when available)
+ $1495.00
Callies 4340 Steel Billet Ultra Crank Shaft Internally Balanced for this Bob Weight
+ $2775.00
Scat 4340 Steel Billet Crank Shaft Internally Balanced for this Bob Weight
+ $2475.00
Callies Ultra or Oliver Steel I Beam Steel Rods, Best in the Business
+ $1075.00
Jesel or T&D Shaft Rocker System Installed
+ $1495.00
Trend Taper Wall 7/16″ Severe Duty Push Rods
+ $ 245.00
Cometic MLS Head Gaskets
+ $ 175.00
Moroso Complete Vacuum Pump System Installed
+ $1075.00
TFS A460 Tunnel Ram 5449400 Intake Manifold 1040Hp with 2×4 Carbs and Linkage
+ $1995.00
MSD Crank Trigger System, Required with Tunnel Ram Option
+ $ 395.00
Fully Port Either Intake Manifold for Maximum Performance
+ $ 795.00
Isky RED ZONE Racing Roller Lifters, Best in the Business
+ $1095.00
Rons Terminator Injection System Completely Installed and Dyno Tested and Tuned
+ $2075.00

Dyno Tested and Tuned with 112 Racing Fuel • Vacuum Pump • Crank Trigger • HP corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.