705CI BBC1900HP Nitrous Race Engine

705ci 1900HP Pro N2O Race Engine

$39,999.00

4.600″ Bore | 5.300″ Stroke | 1400+Hp Raw @6800 RPM & 1900HP w/1 Stage N2O

Components

  • Brodix Aluminum 55mm Raised Cam Fully CNC Race Prepped Block
  • Specific Head Stud Kit w/12Point Fasteners Plate Honed w/Block
  • Intake Valley 4 Inner Head Studs Installed for Ultimate Gasket Seal
  • Callies Magnum Series Internally Balanced Crank
  • GRP Billet Aluminum Pro Mod Severe Duty Rods
  • Clevite or King “HP” Race Series Main and Rod Bearings
  • Wiseco Custom Quick 8 Gas Ported N2O Pistons
  • Precision Tool Steel .300 x 250″ Wall Wrist Pins
  • Total Seal Stainless Steel 043bc-043d-3mm N2O Rings
  • Comp Cams 7/4 Swap Billet 55mm Roller Cam
  • Jesel Raised 1″ Raised Cam Belt Drive
  • Comp Cams Elite HIPPO .904″ Roller Lifters
  • ATI Super Damper Specific Fit Honed to Crank Damper
  • AwesomeEngines® Billet TDC Pointer TDC Verified
  • Brodix 12° PB1204 Fully CNC Ported Heads
  • Brodix Titanium 2.520 and 1.860 Valves
  • New Manley Comp Eliminator Valve Springs
  • Receiver Groove Heads and Install SCE Copper Head Gaskets
  • Trend ½” x .200″ Wall Severe Duty Push Rods
  • T&D Shaft Rocker System Installed
  • Moroso 22167 Gerotor Pump and Moroso Pro Eliminator Oil Pan
  • Return Oil Lines Plumbed From Heads to Pan
  • CFE 2×4 Sheet Metal Intake Manifold w/N2O Bungs Welded In
  • NX 200-600Hp Shark System Completely Installed w/L-250 Solenoids
  • Jomar Special CNC Ported Spacers Installed w/Install Kit
  • 2 QFT 1450cfm N2O FX Carburetors w/Linkage
  • MSD Dist, Crank Trigger, 10.5mm UTH Wires, NGK Race Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

NX 2×4 Dual Stage Plate Systems Installed for 2800+Hp Total (need to know before build)
+ $1495.00
Moroso Complete Vacuum Pump System w/Pump Mounted Relief Valve, Mandrel, Lines, Tank w/ All Hardware
+  995.00
CV Products Made in the USA Starter, SFI Flex-plate and ARP Flex-plate Bolt Kit
+ $325.00
“MAXX DADDY” 3000HP Brand New Loaded PowerGlide Built for this Application
+ $4575.00
10″ Custom N2O Torque Converter w/Steel Stator Custom Pump and Turbine Built for 3000HP
+ $1495.00

Dyno T&T w/C12 Raw • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.