AR Small Block Chevy 195cc Aluminum Cylinder Heads

AR Small Block Chevy 195cc Aluminum Cylinder Heads


AR SBC heads come in a 195cc intake runner. Clean cast cylinder heads come with 2.02 intake and 1.6″ exhaust valves are standard. They are in stock and ready to ship, choose from the upgrades if you need something else for your requirements. Our heads use only Dart or Manley Valves, Comp Cams, Manley or Pac Springs, 10° locks, retainers, screw in 3/8 or 7/16 studs and 5/16 guide plates.



  • Fully Machined 195cc/64cc Aluminum Light Weight Clean Castings
  • AwesomeEngines® uses a Rolled Radius 45° Valve Job
  • Intake Ports with a 2.02″ Valve Flow 250+cfm @ .700″ Lift
  • Exhaust Ports with a 1.6″ Valve Flow 180+cfm @ .700″ Lift
  • Ductile Iron Valve Seats for Unleaded Fuel and Superior Use
  • Bronze Alloy Fully Machined Valve Guides
  • Utilizes Existing SBC Intake Manifolds
  • Uses Standard SBC Header Pattern
  • Uses Standard SBC Rocker Arms
  • All Stock Hardware Bolts Directly to our Heads
  • Increased Deck Thickness to Support Power Adders
  • Accessory Bolt Holes In Stock Location
  • Uses Standard Head Bolts or Head Studs
  • Machined to 64cc Clean Cast Combustion Chambers
  • All Intake and Exhaust Ports have been hand Ported
  • Dart or Manley 2.02″ Stainless Steel Intake Valves
  • Dart or Manley 1.6 Stainless Steel Exhaust Valves
  • All Valve Seats Hand Lapped to Insure Perfect Seal
  • Comp Cams 1.5 Dual Flat Tappet or Hydraulic Roller Springs 600″ Lift Cam
  • Comp Cams or Manley 10° Degree Chrome Moly Steel Retainers
  • Comp Cams 611-16 10° Machined Super Locks
  • U.S. PC Valve Stem Seals Installed (we never leave these off)
  • Comp Cams or Manley Hardened Spring Seats or Washers
  • Comp, Dart or Manley 3/8 or 7/16″ Studs and 5/16 Guide Plates
  • Hot Washed Blown Dry, Lubed and Final Spring Set to Specifications
  • Professionally Assembled, Packaged and Sealed

Available Upgrades

60cc Combustion Chambers
+ $ 100.00
Manley 2..02 1.6 Severe Duty Intake and Exhaust Valves
+ $ 275.00
Manley Extreme Duty and Marine Enconel Exhaust Valves
+ $ 275.00
Pro Series 12 Point Head Stud Kit
+ $ 85.00
Pac or Manley Double Roller Valve Springs and Titanium Retainers for 700″ Lift Package (requires stud girdle or shaft rockers)
+ $ 325.00
Pac or Manley Triple Roller Valve Springs and Titanium Retainers for 700″ Lift Package (requires stud girdle or shaft rockers)
+ $ 475.00
Comp Cams Pro Magnum Light Weight Steel Roller Rockers in a 1.5 or 1.6  Ratio Available
+ $ 359.00
Jomar Complete Stud Girdle Kit with all Hardware and Adjusting Nuts
+ $ 195.00
T&D any Ratio Pro Series Shaft Rocker System
+ $1395.00
Jesel any Ratio Pro Series Shaft Rocker System
+ $1595.00
Fel Pro MLS Head Gaskets (up to 4.200 bore size and .053″ thickness, other sizes available)
+ $ 185.00
Manley Specific Fit Head Bolt Kit
+ $ 85.00
ARP Specific Fit Pro Series Head Stud Kit with 12 Point Fasteners and Washers
+ $ 175.00
ProFiler CNC Match Ported Intake Manifold
+ $ 450.00
Jomar Special CNC Ported 1¼” Spacer, Stud, Gaskets that actually makes up to 5hp and 10lbs of torque
+ $ 125.00

All Completed Heads Come with Specific Build Sheet, all Part numbers, Spring Rates and Installed Height Settings

Comments are closed.