461ci 625lb BBC Torque Monster Crate Engine

461ci 625 Lb BBC Torque Monster Crate Engine

461ci 625lb BBC Torque Monster Crate Engine GenV (has no mechanical fuel pump provision) 461ci bored .030″ Street Crate Engine that are direct replacements 87-93° pump gas applications. Blocks are machined on our 4-axis CNC machining center to 4.840″ blueprint bore specifications, CNC decked to 9.790″, always plate honed to a final 4.280″ bore. Assembled to Perfection, then straight to the Dyno to fine tune to prove is all there for maximum performance. Best product, power, price and performance with our in house Hydraulic Roller camshafts. See Options Below for anything you may want and they are in stock ready to assemble to your needs and with a One Year Warranty. (These listed Torque & Horse Power figures were Dyno Tested and Tuned Total Timing, 93° Exxon with no vacuum pump or PCV for an example of just how much torque these engines have

$8995.00

9.790″ Deck | 4.28″ Bore | 4.0″ Stroke | 6.135″ Rods | 575lb @2000 rpm 625lb under 5000 rpm

Components

  • Gen V 4 Bolt Main One Piece Real Seal Block Fully CNC Race Prepped
  • 4.280″ Max Bore, 9.8″ Deck, Block No External Fuel Pump
  • Brass or Stainless-Steel Lifetime Freeze Plugs
  • GM 4.000″ Standard Externally Balanced Crank
  • GM 6.135″ I-Beam Steel Rods with 3/8″ Bolts
  • King Main, Rod and Cam Bearing Set
  • 9:1 Compression Flat Top Pistons and Moly Rings
  • Comp Cams or Erson Torque Monster Hydraulic Roller Camshaft
  • Comp Cams or Morel Hydraulic Roller Lifters
  • High Performance Double Roller Timing Set
  • GM Steel Timing Cover and TDC Verified Pointer
  • Externally Balanced 8″ GM Harmonic Damper
  • GM Peanut Oval Port Open Chamber Steel Heads Worked Heavily
  • GM Intake and Exhaust Valves
  • Comp Cams or Manley Hydraulic Roller Springs, 10° Tool Steel Lightweight Retainers
  • Complete Fel Pro Performance Gasket Set
  • GM 1.7 Ratio Rockers and .120 Wall 5/16 Chrome Moly Manley or Erson Push Rods
  • GM Short CNC Engraved Aluminum Valve Covers
  • M77 High Pressure Oil Pump with Welded Pickup Tube
  • GM 7 Quart Oil Pan and Dipstick
  • Weiand Street Warrior Dual Plane Intake Manifold
  • Holley Sniper 650Hp Electronic Fuel Injection System
  • HEI Distributor, Coil, MSD 31189 8.5mm Wires and Spark Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

AwesomeEngines® ProComp 300cc Aluminum Oval Port Heads in House Race Prepped to Perfection Valve Job and Proper Valve Spring and Retainer Kit
+ $1475.00
10:1 Compression with 13cc Dome Forged JE or Wiseco Pistons will Require 93° Pump Gas
+ $475.00
Hydraulic Flat Tappet High Performance Street Camshaft, Lifters, Springs, Steel Retainers Performance Camshaft Kit
+ $350.00
Solid Torque Monster Street Roller Camshaft, Bushed Solid Roller Lifters, Springs Camshaft Kit for up to 6000 RPM
+ $770.00
Titanium Retainers
+ $150.00
Holley Stealth (looks like a real carburetor) Regulator, Fuel Pump, Heat Sink Spacer and Line Kit
+ $675.00
External Flexplate and ARP Flexplate Bolt Kit
+ $125.00

Normally Dyno Tested and Tuned Using Exxon 87-93° Pump Gas • HP Corrected to Sea Level • No Vacuum Pump or PCV @ all used

Free Freight of $250 Applies to Engine Shipped to a Commercial Address with a fork lift or; Terminal Closest to Your Zip Code for Pickup and Loading in the 48 States.

Comments are closed.

Skip to toolbar