BBC 565ci 750 Hp Street Heat Crate Engine

BBC 565ci 750 Hp Street Heat Crate Engine

This Street Heat Crate Engine start with the Dart block being 100% CNC machined to specifications for a 4.600 bore and 4.250″ Crank, plate honed to perfection, internally balanced, everything de-burred, hot washed, then meticulously assembled to perfection with 40 years of experience. This engine is blue printed then dyno tested for maximum power and reliability for any application required. Engine data logged for oil pressure, temperature, huge torque curve, horsepower as well as time being run and a turn key engine.


9.785″ Deck | 4.600″ Bore | 4.250″ Stroke | 6.385″ Rods | 750Hp @ 6800 rpm


  • Dart Big M or World IV Splayed Cap 100% CNC Race Prepped Block
  • Dart or World Coated Cam Bearings and Block Small Parts Kit
  • ARP 12 Point ARP Head Stud Kit Plate Honed with Block
  • 4340 Internally Balanced Steel Crank
  • 4340 Steel H-Beam Full Floating Rods with ARP 8740 Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco 15cc 2618 Forged 10.5:1 Compression Pistons
  • JE or Wiseco .180″ Wall Wrist Pins
  • Total Seal Plasma Hi-Performance Ring Set
  • Comp Cams or Erson Hydraulic Pro Street Roller Cam
  • Comp Cams Drag Race Short Travel Hippo Hydraulic Roller Lifters
  • Roll Master Double Roller Torrington Bearing Indexable Timing Kit
  • GM Chrome Timing Cover Kit and TDC Pointer
  • SFI SS 8″ Dampener and Billet TDC Pointer

  • Dart PRO1 345cc Aluminum Heads
  • Dart 2.300/1.880″ Stainless Steel Valves
  • PAC Racing Hydraulic Roller Springs and 10° Retainers
  • Fel Pro 1057 Head Gaskets and all other Racing Gaskets
  • Manley 3/8 x .135″ Wall Push Rod Set
  • Comp Cams Pro Magnum 1.7 Roller Rockers
  • Dart Stud Girdle Kit
  • AwesomeEngines® CNC Engraved Custom Valve Covers
  • Moroso #22175 Oil Pump Kit
  • Moroso #20401 7 Quart Oil Pan and Preformed 1 Piece Gasket
  • ProFiler Sniper Jr Intake Manifold 100% Match Ported to Heads
  • Phenolic Special CNC Ported 4 Hole Heat Sync Spacer
  • Holley or QFT 1050 cfm Carburetor
  • AwesomeEngines® Free 48 State Freight


Comp Cams or Erson Solid Pro Street 7/4 Swap Roller Cam, Hippo Bushed Lifters, Valve Spring and Titanium Retainer Kit
+ $ 895.00
Jesel or T&D Shaft Rocker system
+ $1275.00
Dart PRO1 355 cc 100% Fully CNC Ported Pro Street Heads
+ $1075.00
Cometic or Fel Pro MLS Head Gaskets Installed
+ $ 125.00
Dart Inner Valley Head Stud Kit Installed
+ $ 95.00
ATI SFI Super Damper Specific Honed to Crank Installed
+ $ 275.00
AwesomeEngines® CNC Engraved Powder Coated Valve Covers
+ $ 195.00
Holley or QFT FX 4500 Series 1150cfm (works best with the Pro Street Solid Roller Cam Kit)
+ $ 395.00

Dyno Tested & Tuned with 93° Exxon • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.