BBC 565ci 1400 HP Nitrous Engine

BBC 565ci 1400 Hp Nitrous Engine


We Give You a Turn Key NOS Engine With all the Correct Parts for up to a 1400 HP NOS Racing Engine. The Best Pistons, Tool Steel Wrist Pins, HIPPO Lifters are all a Must. Cloyes Cover with Bearing, ATI Super Dampener, and you Would be a Fool to Run a NOS Engine with a Chinese Dampener. Brodix 100% CNC Ported 365cc Oval Port Heads, Comp Cams Magnum XD Rockers and a Stud Girdle. The Kickout Moroso Oil Pan, NOS 100-500 Hp Plate System, a Dyno Tuned 1150 cfm Carburetor is all included with a MSD Billet Distributor, Wires all READY TO RUN and TESTED for LESS Delivered.

9.800″ Deck | 4.600″ Bore | 4.250″ Stroke | 1400 HP @ 7000 rpm with the 500HP Tune Up


  • DART BIG M or WORLD IV 100% CNC Race Prepped Block
  • ARP Head and DART Inner Valley Stud Kit
  • K1 4340 Internally Balanced Center Counterweight Crank
  • K1 Steel Billet H Beam Rods with ARP 2000 Rod Bolts
  • KING Race Series Main and Rod Bearings
  • JE or WISECO QUICK 16 NOS Gas Ported Coated Skirt Pistons
  • JE or WISECO .200″ Wall 52100 Tool Steel Wrist Pins
  • TOTAL SEAL 043/043/3.0 mm SS, TNT or Hell Fire NOS Rings
  • COMPETITION CAMS 7/4 Swap Billet .800″ NOS Cam
  • ROLLMASTER Billet Timing Set, IWIS Chain, Torrington Bearing
  • CLOYES 9-231 2 Piece Aluminum Timing Cover with INT Bearing
  • ATI Super Dampener Specific Honed to Fit Crank Used
  • Billet TDC Pointer TDC Verified
  • BRODIX O-365cc 100% CNC Ported Heads (these are way better for NOS)
  • BRODIX 2.350 x 1.880 Stainless Steel Valves
  • PAC RACING 1247 Triple Springs, Titanium Retainers
  • COMETIC or FEL PRO MLS Head Gaskets
  • MANLEY .375 x .135″ Wall Push Rods
  • COMPETITION CAMS Ultra Pro Magnum XD Rockers and Girdle
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • MOROSO 22175 Oil Pump Kit, Tig Welded Pickup, Stud, Shaft
  • MOROSO 21049 Kick Out Steel Eliminator Pan
  • BRODIX CNC Ported Intake Manifold and Jomar Spacer
  • SPEEDTECH Diffuser 231-210 100-500Hp Plate System
  • HOLLEY ULTRA or QFT 1150 cfm NOS Carburetor
  • MSD Distributor, 8.5 mm Wires and NGK Plugs
  • Free 48 Freight


Steel Billet Main Cap Option for Either Block
+ $ 425.00
CALLIES MAGNUM 4340 Internally Balanced Crank (heavy metal is included)
+ $1250.00
CALLIES Ultra H-Beam 4330M Timken Steel Rods w/ARP H-11 Bolts
+ $ 950.00
OLIVER MAX I Beam Steel Rods with L19 Rod Bolts
+ $1050.00
ISKY RED ZONE EZX Needle Free Bushed Roller Lifters
+ $ 825.00
JESEL Belt Drive System
+ $ 850.00
JESEL or T&D Shaft Rocker System
+ $1295.00
MOROSO 22163 Billet Oil Pump Installed
+ $ 250.00
MOROSO #20385 Pro Eliminator Aluminum Oil Pan
+ $ 395.00
MOROSO Vacuum Pump System, Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00
SPEEDTECH Liquid Force Fogger Kit with Stainless Steel Nozzles; Installed and Plumbed
+ $1450.00
MSD Crank Trigger System Installed and Dyno Tested with Engine
+ $ 275.00

Dyno Tested and Tuned Using C16 • Vacuum Pump • HP Corrected to Sea Level

Some Components Subject to Change Due to Availability with Prior Notice Only. Free Freight Applies to this Advertised Item Shipped to a Commercial Address or Freight Terminal in the 48 States. Residential, Out of Area or Lift Gate Service Subject to Additional Charges. Requested Added Insurance or any Handling Fees Apply.

Comments are closed.