BBC 565ci 1700 Hp Nitrous Engine

BBC 565ci 1700 Hp Nitrous Engine

$18,995.00

9.800″ Deck | 4.600″ Bore | 4.250″ Stroke | 1700 HP @ 7000 rpm

Components

  • Dart Big M or World IV 100% CNC Race Prepped Block
  • Oring Block Install Stainless Steel .041″ Wire
  • ARP Head and Inner Valley Stud Kit
  • Callies Magnum Internally Balanced Crank
  • Oliver Steel I Beam Rods with L19 Rod Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco Big Hit Nitrous Gas Ported Coated Skirt Pistons
  • JE .220″ Thick Wall Tool Steel Nitrous Wrist Pins
  • Total Seal 043/043/3mm Stainless Steel Nitrous Rings
  • Competition Cams 7/4 Swap Billet Nitrous Cam
  • Cloyes 9-3747 Quick Adjust True Roller with Torrington Bearing
  • Comp Cams 3 Piece #312 Polished Aluminum Timing Cover
  • Competition Cams BUSHED HIPPO Roller Lifters
  • ATI Super Dampener and Billet TDC Pointer
  • Brodix O-365cc 100% CNC Ported Heads
  • Brodix 2.350 x 1.880 Stainless Steel Valves
  • Manley NexTek or PAC Racing 1.500  Springs and Titanium Retainers
  • Receiver Grove Heads and SCE Copper Head Gaskets
  • Trend Taper Wall 7/16 x .165″ Wall Push Rods
  • Comp Cams Magnum Rockers with Jomar Girdle
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • AwesomeEngines®/Moroso 22163 Billet Aluminum Oil Pump
  • AwesomeEngines®/Moroso 21049 Kick Out Steel Eliminator Pan
  • Brodix CNC Ported Intake Manifold and Jomar Spacer
  • Nitrous Express NRC Plate System 250 to 750Hp
  • Holley Ultra or QFT 1150 cfm Nitrous Series Carb
  • MSD 84697 Distributor, Crank Trigger, 8.5 mm Wires and NGK Plugs
  • AwesomeEngines® Shirt, Free 48 Freight (see 2013 updates)

OPTIONS

Dart Raised .600 Cam Special Race Block w/Wide Oil Pan and 54mm Camshaft (will require Jesel belt drive $595)
+ $ 895.00
Brodix or Dart Aluminum Block 100% CNC Blue-Print Race Prepped Block and Special Stud Kit
+ $3995.00
Callies XL Series NO Drill Internally Balanced Crank (heavy metal is included already
+ $1295.00
GRP Billet Aluminum Pro Mod Rods Installed, Radial Clear Block for Rods
+ $ 250.00
Precision .300 x .250 Taperwall Wrist Pins (used for 2 stages or 600+hp, may require more heavy metal; will need to know before beginning)
+ $ 195.00
Jesel Belt Drive System
+ $795.00
Titanium Intake Valves and Copper Beryllium Valve Seats Installed
+ $ 995.00
Jesel or T&D Pro Series 1 Piece Shaft Rocker System
+ $1095.00
Moroso 22167 Billet Gerotor Oil Pump Installed
+ $ 125.00
Moroso #20385 Pro Eliminator Aluminum Oil Pan
+ $ 295.00
Moroso Complete External Oil Pump and  20385 Aluminum Revised Oil Pan with a Special Pickup Installed
+ $ 895.00
Moroso Complete 5 Stage Dry Sump System Installed (vacuum pump not required)
+ $2995.00
Moroso Accumulator System Installed
+ $ 295.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1095.00
NX 200-600Hp Shark Nozzle 2nd System Installed
+ $1795.00
Power Master Made in the USA Starter, Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $ 375.00

Dyno Tested and Tuned  Using C 23 • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.