BBC 565ci 965 Hp Pro Bracket Race Engine

BBC 565ci 965 Hp Pro Bracket Race Engine

$14,775.00 Turn Key

9.780″ Deck | 4.600″ Bore | 4.250″ Stroke | 6.535″ Rods | 965 Hp 7400 rpm

Brodix 363cc 3X CNC Ported Chambers Cylinder Heads, Wiseco 14.5:1 Quick 16 Pistons, Tool Steel Wrist Pins, Hell Fire 043 Rings, CNC Match Ported Intake, 1150 CFM Carburetor and Phenolic Spacer, ARP Head and Inner Valley Head Stud Kit, K1 Crank and H Beam Rods, ARP 2000 Rod Bolts, Competition Cams Hippo Roller Lifters, Manley .135″ Wall Push Rods, Jomar Stud Girdle, MLS Head Gaskets, ATI Super Dampener and Crank Trigger are Included with this Turn Key Best Price, Best Products Best Power Complete NOS Race Ready Engine

Components

  • Either Dart Big M or World IV Splayed Cap 100% CNC Race Prepped Block
  • Dart or Durabond Coated Cam Bearings and Block Small Parts Kit
  • ARP Head and Inner Valley Stud Kit Plate Honed with Block
  • Manley Center Counterweight 4340 Internally Balanced Crank Shaft
  • K1 H Beam 4340 Steel Rods with ARP 2000 Bolts
  • Clevite or King HP Main and Rod Bearings
  • Wiseco K006B100 NOS 14.3:1 Quick 16 Gas Ported Coated Skirt Pistons
  • Wiseco .180″ Wall 9310 Tool Steel Wrist Pins
  • JE Hell Fire or Total Seal TNT 043/043/3.0 mm File to Fit Rings
  • Competition Cams .800″ Lift 7/4 Swap Steel Billet Roller Camshaft
  • Competition Cams Hippo Solid Roller Lifters
  • Rollmaster Billet Timing Set, IWIS Chain and Torrington Bearing
  • GM Chrome Timing Cover and Billet TDC Pointer
  • ATI Super Dampener Specific Honed To Crank Shaft
  • Brodix 3 X 363 cc CNC Ported Chamber Heads 433/280 Flow @ .800″
  • Manley NexTek 1.640″ Roller Springs, Titanium 10° Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rods
  • Competition Cams Ultra HD Magnum Roller Rockers
  • Jomar Pro Series Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso 22175 Complete Oil Pump Kit with Tig Welded Pick Up
  • Moroso #20405 Stroker 7 Quart Oil Pan
  • Brodix 100% CNC Match Ported 4500 Intake with Turtle
  • Jomar CNC Ported 2.0″ Spacer
  • Holley GEN3 or QFT FX 1150 CFM Carburetor
  • MSD Billet Distributor, Crank Trigger, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Steel Billet Splayed Main Caps for Either Block
+ $ 425.00
.904″ Lifter Bore and Hippo Lifters
+ $ 475.00
Brodix 3 XTRA O 365 cc Fully CNC Ported Heads Making 1000 Hp @ 7600 rpm with Triple Springs 2.350/1.88 with 452/308 Air Flow @ .800″ Lift
+ $1275.00
Inconel Exhaust Valves
+ $ 275.00
Competition Cams Bushed HD Solid Roller Lifters
+ $ 475.00
Isky EZ-ROLL X Helix Bushed 1400 lb Open Pressure Roller Lifters
+ $ 875.00
Jesel or T&D 1.7 Shaft Rockers
+ $ 975.00
Trend Taper-Wall 7/16 x .165″ Severe Duty Push Rods, Clear Cylinder Heads with Shaft Rockers Only
+ $ 375.00
Jesel Belt Drive System
+ $ 875.00
Moroso #21047 7 Quart Eliminator Oil Pan with Sectional Oil Control and Passenger Kickout
+ $ 275.00
Moroso Complete Vacuum Pump System Installed and Dyno Tested with Engine
+ $ 975.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar