BBC 582ci 810 Hp Pro Street Crate Engine

BBC 582ci 810 Hp Pro Street Crate Engine

Pro Street Crate Engines are enhanced with 100% CNC ported heads, match ported intakes, aggressive camshaft all for Pro Street, Drag and Marine applications that are dyno tested for maximum HP. Best in the business professionally 100% machined on a 4 axis CNC Centroid block machining center, assembled, Dyno Tested and Tuned by me.


9.785″ Deck | 4.600″ Bore | 4.375″ Stroke | 6.535″ Rods | 810 Hp @ 7000 @ rpm


  • WORLD IV Splayed Main Cap Block
  • Cam Bearings and Brass or Stainless Steel Freeze Plugs
  • Head and Inner Valley Stud Kit
  • 4340 Internally Balanced Steel Crank
  • K1 Steel Billet H-Beam 6.535″ Rods with ARP 2000 Rod Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco Gas Ported Coated Skirt 10.75:1 Forged Pistons
  • Total Seal Plasma Moly .043/.043/3.0 mm Lightweight Ring Set
  • Competition Cams Drag Race Hydraulic Roller 7/4 Swap Cam
  • Competition Cams DRST Short Travel Race Hydraulic Roller Lifters
  • Cloyes Double Roller Timing Chain Set with Torrington Bearing
  • Cloyes Aluminum Timing Cover with Roller Bearing and Billet TDC
  • ATI SFI Approved Internal Balanced Super Damper
  • Dart Pro 1 355cc Fully CNC Ported Aluminum Heads
  • Manley 2.300″ x 1.880″ Stainless Steel Valves
  • PAC Racing Bee Hive Hyd Roller Springs and Titanium Retainers
  • Fel Pro High Performance Head Gaskets and all Other Race Gaskets
  • Manley 3/8 x .135″ wall Push Rods
  • Comp Cams Pro Magnum 1.7 Rockers and Jomar Stud Girdle
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso #22175 Oil Pump Kit
  • Moroso #21048 Eliminator 7 Qt. Capacity Kick Out Oil Pan
  • ProFiler 100% CNC Match Ported Intake and Jomar Spacer
  • Holley or QFT 1150 cfm Pro Street Carburetor, #6 Fittings, Stud Kit
  • MSD Billet Dist, 8.5 mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight


Comp Cams or Erson Solid Pro Street 7/4 Swap Roller Cam, Hippo Bushed Lifters, Valve Spring and Titanium Retainer Kit
+ $ 475.00
Callies Magnum 4340 Internally Balanced Crank
+ $1475.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 975.00
Callies Ultra I Beam Rods with L19 Rod Bolts
+ $1075.00
Fel Pro MLS Head Gaskets Installed
+ $ 125.00
Jesel or T&D Shaft Rocker System
+ $1095.00
Jesel Belt Drive System Installed
+ $ 975.00
AwesomeEngines® Billet CNC Engraved Logo Powder Coated Covers with Billet Oil Fill
+ $ 275.00
Moroso Complete Vacuum Pump System Installed with Pump Mounted Relief Valve
+ $1075.00

Dyno Tested & Tuned with 93° Exxon • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar