BBC 598ci 1085 Hp Pro Bracket Race Engine

BBC 598ci 1085 Hp Pro Bracket Race Engine

$21,575.00 Turn Key

9.800″ -0- Deck | 4.600″ Bore | 4.500″ Stroke | 6.535″ Rods | 840 lb @ 6000-1085 Hp 7600 rpm

Dart Big M PRO Steel Billet Cap .600″ Raised 54 mm Cam Race Block, 4340 Steel Billet Internally Balanced 8-CW Crank, Molnar SD H-Beam Rods, ARP 2000 Bolts, HH MC 395 cc 100% CNC Ported Cylinder Heads, Wiseco 15.25:1 Custom Quick 16 Pistons, 9310 Tool Steel Pins, AP Steel .9-.9- 3.0 mm Rings, CNC Match Ported Intake, 1450 CFM Carburetor, Inner Valley Stud Kit, Competition Cams HD Bushed Needleless Hippo Roller Lifters, MLS Head Gaskets, ATI Super Dampener, Crank Trigger with this Turn Key Race Engine Shipped 48 State Freight

Components

  • Dart Big M PRO .600″ RC Steel Billet Cap 100% CNC Race Prepped Block
  • ARP Head and Inner Valley Stud Kit Plate
  • Steel Billet Center Counterweight 4340 Internally Balanced Crank
  • Molnar Severe Duty 4340 6.700″ H-Beam Steel Rods and ARP 2000 Bolts
  • Clevite or King HP Main and Rod Bearings
  • Wiseco Custom 15.25:1 Quick 16 Gas Ported Coated Skirt Pistons
  • Wiseco .180″ Wall 9310 Tool Steel Wrist Pins
  • Total Seal .9/.9/3.0 mm AP Steel Ring Set
  • Competition Cams .800″ Lift 7/4 Swap Steel Billet Roller Camshaft
  • Competition Cams HD Bushed Severe Duty Hippo Solid Roller Lifters
  • Jesel Raised Cam Belt Drive Kit
  • ATI Super Dampener Specific Honed To Crank
  • BP HH BB 395cc MC Fully CNC Ported Heads,2.400/1.85-477/315 Air Flow
  • Pac Racing 1.650″ Triple Roller Springs, Titanium 10° Retainers
  • Cometic or Fel Pro Multi Layer Steel Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series Shaft Rockers
  • AwesomeEngines® Sheet Metal CNC Logo Valve Covers
  • Moroso 22175 Oil Pump Kit with Tig Welded Pick Up
  • Moroso #21047 Pro Eliminator Steel 7 Quart Oil Pan
  • Brodix BM2017 100% CNC Match Ported Intake with Turtle
  • Jomar CNC Ported 1¼” Spacer
  • Holley GEN3 1350 CFM Carburetor
  • MSD Billet Distributor, Crank Trigger, 8.5mm Wires and NGK Plugs

OPTIONS

Callies Magnum Series Crank and Ultra I Beam Steel Rods with L19 Rod Bolts Internally Balanced with Heavy Metal
+ $1675.00
Titanium Intake Valves
+ $ 775.00
Isky EZ-ROLL­™ X Helix Bushed 1500 lb Open Pressure Roller Lifters
+ $ 575.00
Jesel or T&D 1.7 Shaft Rockers with Roller Tip
+ $ 275.00
Trend Taper-Wall 7/16 x .165″ Severe Duty Push Rods, Clear Cylinder Heads with Shaft Rockers Only
+ $ 475.00
Moroso #20385 Pro Aluminum Eliminator Oil Pan with Sectional Oil Control and Passenger Kickout
+ $ 275.00
Moroso Complete Vacuum Pump System Installed and Dyno Tested with Engine
+ $ 975.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar