BBC 632ci Basic Short Block

632ci BBC Basic Short Block

$4895.00

World IV 10.200″ exclusively machined for up to a 4¾ Stroke and steel rods. 10:1 for street and up to 15:1+ compression for drag racing, depending on bore and stroke for application, (From $5995) with competitors pricing and they always sell you upgrades. These short blocks are rated to 1000hp and we use 4340 internals with Wiseco 2618 Pro Series  10 to 15:1 Pistons.

World IV ARP Studded Splayed Cap 10.2″ Block • CNC Blue Print Bored • CNC 4 Axis Square Decked • CNC Blue Print Radial Clearance for 4¾” Stroke and Steel Rods • Plate Honed • Cam/Bearings, Brass or Stainless Freeze Plugs • Assembled w/Rotator Listed

4¾″ Internally Balanced 4340 Steel Crank ­ ­• 6.700″ H-Beam Rods • Wiseco KA Pro Series 4.600/1.120/ch 10:1 to 15:1 Pistons • Total Seal 1/16-1/16-3/16″ Plasma Moly Rings • Clevite or King “HP” Bearings • Double Lip Rear Main Seal Installed

Available Upgrades

BRODIX-$4295 or DART Aluminum Block Fully race Prepped
+ $3995.00
4.750 Stroke to 632ci upgrade
+ Included
WORLD IV Race Block w/Steel Billet Caps
+ $ 495.00
55mm Cam and .904 Lifter Bores Merlin III Block
+ $ 495.00
Scat or Eagle 4340 Internally Balanced Crank
+ $  95.00
K1 or Manley 4340 Crank
+ $ 175.00
Eagle H-Beam 3D Rods w/L19 Bolts
+ $  95.00
K1 or Manley H Beam Rods with ARP 2000 Rod Bolts
+ $ 175.00
Callies H-Beam with L19 Bolts
+ $ 295.00
Wiseco “Quick 16” Gas Ported Coated Skirt Pistons w/.043 Top Ring Package
+ $  95.00
Wiseco “Quick 8 or 16” Nitrous Version Gas Ported Coated Skirt Pistons w/.043.043 3mm Ring Package
+ $ 195.00
Custom Forged 2618 Wiseco or JE 8:1 to 10:1 Dish Pistons for up to -40CC Dish for Lower Compression Ratios with Small Chamber Heads
+ $ 375.00
Total Seal TNT or Stainless Steel Severe Duty Ring Package (required over 1000hp) new lower pricing
+ $ 175.00
Trend or Precision Tool Steel Severe Duty .180″ Wall Wrist Pin Upgrade
+ $ 195.00
Fel Pro #1077 MLS Head Gaskets for Superior Head Gasket Seal
+ $ 225.00
Head Stud Kit Used For Plate Honing Your Block (from)
+ $ 125.00
Comp Cams .775″ Solid Roller Camshaft Kit Installed (DR Series Hyd Roller for Street or Drag no charge)
+ $ 595.00
Deluxe Short Block Kit Below w/Roller Cam (add $275 for ATI Damper)
+ $1395.00
Comp Cams DR/ST Racing Hydraulic Roller Lifters for Complete Long Short Block
+ $ 595.00
Comp Cams “HIPPO” Solid Roller Lifters for Complete Long Short Block
+ $ 595.00
ATI Super Damper Specfic Fit Honed to Crank
+ $ 275.00

Cam Shaft Kit

  1. Comp Cams .775″ Lift Custom Steel Billet Roller Camshaft or Your Choice
  2. Cloyes Billet Timing Set w/Torrington Roller Bearing
  3. Degree Camshaft & Professionally Install Part Kit
  4. Comp Cams Camshaft Button Installed
  5. Comp Cams Lock Kit Installed

Deluxe Short Block Kit

    1. Above Cam Shaft Kit (or your choice!)
    1. Solid Polished Aluminum Timing Cover
    1. AwesomeEngines® Billet Timing Pointer
    1. PRW Damper is now Standard in Deluxe Kit
    1. Melling HP Oil Pump and Tig Welded Pick Up Tube
    1. Moroso 7 Quart #20406 Drag Race Stroker Oil Pan Installed
    1. Timing Cover, Front Seal and One Piece Rubber Stroker Oil Pan Gaskets
  1. Complete Assembly and Deluxe Kit Professionally Buttoned Up Nice and Neat!

NOS Short Block Package $675.00

Total Seal Stainless Steel or TNT Nitrous Rings • .180″ Wall 1800 Hp Steel Severe Duty Wrist Pins
• Oring Block w/.041″ Stainless Steel Wire • Wiseco NOS Series Pistons • Rings File Fit for NOS • NOS Series Camshaft

Complete Internally Balanced Short Blocks Come with Blue Print and Balance Sheet as well as all Product Information, Stickers and Contingency Information

Comments are closed.