BBC 598ci 990 Hp Bracket Race Engine

BBC 598ci 990 Hp Bracket Race Engine

$15,495.00

9.800″ -0- Deck | 4.600″ Bore | 4.500″ Stroke | 6.535″ Rods | 830 Lb @ 5800 rpm 990 Hp @ 7200 rpm

Molnar Internally Balanced 8-CCW 4340 Crank and SD H Beam Rods, Custom Wiseco 14.71:1 Quick 16 Pistons, Tool Steel .180″ Wall Pins, JE Hell Fire .043 .043 3.0 mm Rings, Competition Cams HD Bushed Hippo Lifters, Inner Valley Stud Kit, Jomar Stud Girdle

 

Components

  • Dart Big M or World IV Splayed Cap 100% CNC Race Prepped Block
  • Coated Dart or DuraBond Cam Bearings and Block Small Parts Kit
  • 12 Point Head and Inner Valley Stud Kit Plate Honed with the Block
  • Molnar Center Counterweight 4340 Internally Balanced Crank
  • Molnar Severe Duty 4340 H-Beam Rods with ARP 2000 Asymmetrical Bolts
  • Clevite or King HP Main and Rod Bearings
  • Wiseco 42cc-14.74:1 Quick 16 Gas Ported Coated Skirt Pistons
  • Wiseco .180″ Wall 9310 Tool Steel Wrist Pins
  • JE Hell Fire Severe Duty 043-043-3.0 mm  Rings
  • Competition Cams 7/4 Swap Steel Billet Roller Camshaft
  • Competition Cams HD Bushed Severe Duty Hippo Roller Lifters
  • Rollmaster Billet Timing Set, IWIS Chain and Torrington Bearing
  • GM Chrome Timing Cover and TDC Verified Pointer
  • SFI Approved Harmonic Dampener
  • Brodix BB3 XTRA 363 cc CNC Chamber Heads 2.300/1.88″ 433/280 @ .800″
  • Pac Racing Double Roller Springs, Titanium 10° Retainers
  • Fel Pro 1057 Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rods
  • Competition Cams Ultra 1.7 Ratio Rockers
  • Jomar Pro Series Light Weight Stud Girdle Kit
  • AwesomeEngines® CNC Logo Valve Covers
  • Moroso 22175 Oil Pump Kit with Tig Welded Pick Up
  • Moroso Drag Racing 7 Quart Oil Pan
  • Brodix BM2017 Intake Manifold
  • Jomar CNC Ported 1¼” Spacer
  • Holley or QFT 1250 CFM Carburetor
  • MSD Billet Distributor, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Steel Billet Splayed Main Caps for Either Block
+ $ 425.00
.904″ HIPPO Lifters
+ $ 475.00
Brodix BB3X O 365 cc with 2.35/1.88″ Valves Fully CNC Ported Oval Port Heads Flowing 452/308 @ .800″ Lift 1000+Hp
+ $ 975.00
PAC Triple Springs and Titanium Retainers
+ $ 375.00
Cometic or Fel Pro MLS Severe Duty Head Gaskets
+ $ 100.00
Isky EZ-ROLL­™ X Helix Bushed 1500 lb Open Pressure Roller Lifters
+ $ 575.00
21047 Drag Race 7 Qt. Oil Pan with Right Side Kick Out
+ $ 275.00
CNC Match Ported Intake to Cylinder Heads
+ $ 195.00
Moroso Complete Vacuum Pump System Installed and Dyno Tested with Engine
+ $ 975.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States;

Comments are closed.

Skip to toolbar