BBC 598ci 1040 Hp Bracket Race Engine

598ci 1040HP BBC Bracket Race Engine

$14,995.00

10.175″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.800″ Rods | 1040Hp @ 7000 rpm

Components

We include; inner head stud kit, Hippo Lifters, Triple Springs, Magnum Rockers, .135″ Wall Push, Rods , Stud Girdle

Components

  • Dart or World IV Splayed Cap CNC Race Prepped Block
  • Stainless Steel Freeze Plug Kit Installed for Life Time Service
  • Head and Inner Valley Stud Kit Plate Honed with Block
  • Eagle or Scat 4340 Internally Balanced Crank
  • Eagle or Scat H Beam Steel Rods
  • King “HP” Race Series Main and Rod Bearings
  • JE Wiseco Quick 16 Gas Ported 14:1 Pistons
  • JE Wiseco .180″ Wall Wrist Pins
  • Total Seal .043 Plasma Moly File to Fit Ring Set
  • Comp Cams .800 Lift 7/4 Swap Solid Roller Camshaft
  • Cloyes Double Roller with Torrington Bearing
  • Aluminum Timing Cover and Billet TDC Pointer
  • ATI Super Damper Specific Honed to Fit Internally Balanced
  • Brodix 365cc Oval Fully CNC Ported Cylinder Heads 452/308 .800″
  • Brodix 2.350-50° x 1.880-45° Stainless Steel Valves
  • Pac Triple Springs and Titanium 10° Retainers
  • Fel Pro HP Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rods
  • Comp Cams Pro Magnum 1.7 Rockers and Jomar Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Complete Oil Pump Kit
  • Moroso Stroker 7qt Kick Out Oil Pan
  • Brodix CNC Match Ported Intake Jomar CNC Ported Spacer
  • Holley or QFT 1250cfm Carburetor
  • MSD 84697 Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Steel Billet Main Cap Upgrade to Block
+ $ 475.00
.904″ Lifter Bore
+ $295.00
K1 or Manley 4340 Internally Balanced Crank Shaft
+ $ 150.00
K1 or Manley H Beam Rods with ARP2000 Rod Bolts
+ $ 150.00
Callies Comp Star Rods with ARP2000 Bolts
+ $ 295.00
Comp Cams HIPPO Bushed Roller Lifters
+ $595.00
Jesel Sportsman Shaft Rockers
+ $995.00
Jesel or T&D Pro Series Split Ratio 1.8/1.7 Shaft Rockers Installed
+ $1295.00
Jesel Belt Drive System
+ $895.00
MSD Crank Trigger Set Up Installed and Dyno Tested
+ $295.00
Moroso Complete New Vacuum Pump System Installed
+ $995.00
Moroso 20385 Pro Aluminum Eliminator Steel Side Kick Out Oil Pan
+ $ 495.00
Ultra SFI 168 Tooth Flex-Plate Internally Balanced in House and ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Heavy Duty Starter
+ $245.00

Dyno Tested and Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Comments are closed.