BBC 598ci 1175 Hp Silver Bullet Race Engine

598ci 1175Hp BBC Silver Bullet Race Engine

 $24,995.00

Short Deck | 4.600″ Bore | 4.500″ Stroke | 6.535″ Rods | 900lbs/1175Hp @6000/7600 rpm

Components

  • Dart Aluminum Block 4 Axis CNC Race Prepped Block
  • ARP 12 Point HP Head Stud Kit Plate Honed with Block
  • Inner Valley Extra Head Stud Kit Plate Honed with Block
  • Steel Billet Internally Balanced 4340 Crank
  • K1 or Manley H Beam Rods and ARP2000 Bolts
  • Clevite or King “H” Race Series Main and Rod Bearings
  • Wiseco 15:1 Quick 8 Pro Series Gas Ported Coated Skirt Pistons
  • JE Wiseco .180″ Thick Wall Wrist Pins
  • Total Seal TNT or Hell Fire 043-043-3.0mm Low Tension Rings
  • Comp Cams .880″ 7/4 Swap Steel Billet Roller Camshaft
  • Cloyes 9-3747 Quick Adjust Billet True Roller with Torrington
  • Cloyes 3 Piece Polished Aluminum Timing Cover
  • Comp Cams .904″ NBO Bushed HIPPO Roller Lifters
  • ATI Super Damper and Billet TDC Verified Pointer
  • Brodix-AwesomeEngines® AR20° Fully CNC Ported Heads
  • Victory Titanium 2.400 Intake and Copper Beryllium Valve Seats
  • Pac or Manley Triple Springs and Titanium Retainers
  • Fel Pro MLS Multi-Layered Head Gaskets
  • Trend Taper-Wall 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System with 1.8/1.75 Ratio
  • AwesomeEngines® Sheet Metal CNC Engraved Logo Valve Covers
  • Moroso 22163 Billet Oil Pump
  • Moroso #20385 Aluminum Pro Eliminator Kick Out Oil Pan
  • Moroso 4 Vane Complete Vacuum Pump System
  • Brodix CNC Match Ported Intake and Jomar Spacer
  • Holley or QFT 1350cfm Race Series Carburetor
  • Moroso Wires, MSD Distributor, Crank Trigger, NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Lite Version Brodix or Dart Raised 55MM Camshaft Upgrade
+ $795.00
Callies Magnum Series Internally Balanced Crank (may require heavy metal @ $75 per slug)
+ $995.00
Oliver Steel I Beam Rods (Callies Ultra Series I Beam Rods L19 Bolts $1195)
+ $ 895.00
JE Wiseco .200″ Wall Tool Steel Wrist Pins (may require heavy metal @75 per slug)
+ $ 195.00
Isky Red Zone NBO Bushed Hippo Roller Lifters
+ $695.00
Jesel Belt Drive Installed
+ $995.00
Titanium Exhaust Valves and Copper Beryllium Seats
+ $895.00
Jesel or T&D Shaft Rocker Roller Bearing Tip Option
+ $295.00
Moroso Complete 4 Vane Vacuum Pump System Installed
+ $995.00
Moroso Billet #22171 Billet Oil Pump
+ $150.00
MSD Crank Trigger
+ $295.00
Ultra SFI 168 Tooth Flex-Plate in House Balanced and ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Starter
+ $245.00

Dyno T&T using 112 Fuel • Vacuum Pump • Crank Trigger • Corrected to Sea Level

Comments are closed.