BBC 598ci 1900 Hp Nitrous Race Engine

BBC 598ci 1900 Hp Nitrous Race Engine

$20,975.00

9.800+$495 or 10.200″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.385 or 6.700 | 1900 Hp @ 7000 rpm

Components

  • World IV Splayed Cap 100% CNC Race Prepped Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Brodix Head and Inner Valley Stud Kit Plate Honed with Block
  • Callies Magnum 4340 Internally Balanced Crank
  • Oliver Steel I Beam Severe Duty Rods
  • Clevite or King Racing Series Bearings
  • JE or Wiseco Quick 8 Gas Ported Custom N2O Pistons
  • JE .220″ Wall Severe Duty N2O Steel Wrist Pins
  • Total Seal Stainless Steel 043bc-043d-3.0 mm Nitrous Rings
  • Comp Cams .850″ Lift 7/4 Swap Billet Roller Cam
  • Cloyes 9-3747 Quick Adjust Billet Timing Set with True Roller and Torrington
  • Cloyes Polished Aluminum Timing cover with Internal Cam Button
  • Comp Cams BUSHED “HIPPO” Severe Duty Roller Lifters
  • ATI Super Damper and Billet TDC Pointer
  • Big Duke PB1802 456cc CNC Ported Heads
  • Brodix 2.400 Intake and 1.900 Exhaust Valves
  • Pacaloy 1.650″ Triple 948 Springs and Titanium  Retainers
  • Fel Pro MLS Severe Duty Gaskets
  • Jesel or T&D Shaft Rocker System and Trend 7/16 Push Rods
  • AwesomeEngines® CNC Logo Big Duke Aluminum Valve Covers
  • AwesomeEngines® Moroso 22163 Billet Oil Pump
  • Moroso 21047-9 Right Side Kick Out and Sectional Oil Control Pan
  • Brodix Big Duke CNC Match Ported 4500 Intake
  • Holley Ultra or QFT 1250 cfm Nitrous Carburetor
  • Jomar Special CNC Ported 1¼” Spacer Kit
  • Nitrous Express NRC 750+Hp Plate System
  • MSD Dist, Crank Trigger, 8.5 mm Wires and NGK Race Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Raised .600 Cam Special Race Block w/Wide Oil Pan and 54mm Camshaft (will require Jesel belt drive)
+ $ 895.00
Brodix or Dart Aluminum Block 100% CNC Race Prepped with Special Stud Kit
+ $3995.00
Callies XL Series Lightweight NO Drill Internally Balanced Crank (heavy metal included)
+ $1295.00
GRP Billet Aluminum Pro Mod Rods Installed (additional clearance is required)
+ $ 275.00
Precision .300 x .250 Taperwall Wrist Pins (required for 2 stages)
+ $ 255.00
Titanium Intake Valves and Copper Beryllium Seats Installed
+ $ 995.00
Enconel Exhaust Valves
+ $ 350.00
Moroso 22167 Billet Gerotor Oil Pump Installed
+ $ 125.00
20385 Moroso Pro Eliminator Aluminum Oil Pan
+ $ 375.00
Moroso Complete External Oil Pump and Special 20385 Aluminum Oil Pan with Special Pickup Installed
+ $ 995.00
Moroso Complete 5 Stage Dry Sump System Installed (no need for vacuum pump)
+ $3495.00
Moroso Accumulator System Installed
+ $ 395.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1095.00
NX 200-600Hp Shark Nozzle Complete with Bottle 2nd Stage System Installed (Precision wrist pins included)
+ $1995.00
Power Master Made in the USA Starter, Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $ 325.00

Dyno Tested and Tuned with C23 • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.