BBC 598ci 820 Hp Street Heat Crate Engine

BBC 598ci 820Hp Street Heat Crate Engine

$15,975.00

Street Heat Crate Engines for Muscle Cars, Hot Rods, Pro Street, Drag and Marine applications are complete dyno tested units. Best in the business, 100% CNC machined on 4 axis Centroid block machining Center, assembled by me, Dyno Tested and Tuned by me.

10.175″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.800″ Rods | 820 Hp @ 6600 rpm

Components

  • Dart or World IV Splayed Main Cap 100% CNC Machined Block
  • ARP Head and Inner Valley Stud Kit
  • Coated Cam Bearings and Block Small Parts Kit
  • 4340 Internally Balanced Steel Crank
  • K1 Steel Billet 4340 H-Beam Rods with ARP 2000 Rod Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco 10.95:1 Forged Pistons
  • Total Seal Plasma Moly Ring Set
  • Comp Cams or Erson Street Heat Hydraulic Roller Cam
  • Comp Cams or Erson Hydraulic Roller Lifters
  • Double Roller Timing Set with Torrington Bearing
  • Chrome Timing Cover, TDC Pointer TDC Verified
  • SFI SS 8″ Dampener and Billet TDC Pointer
  • Brodix BB3 Extra 363cc Aluminum Heads
  • Brodix 2.300″ x 1.880″ Stainless Steel Valves
  • PAC Racing Hydraulic Roller Springs and Retainers
  • Fel Pro High Performance 1057 Head Gaskets
  • Manley 3/8 x .135″ Wall Push Rod Set
  • Comp Cams Magnum 1.7 Roller Rockers
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso #22175 Oil Pump Kit
  • Moroso #20406 6 Qt. Capacity 8″ Deep Oil Pan
  • Brodix 4500 100% CNC Match Ported Intake Manifold
  • Holley or QFT 1250 cfm Carburetor, #6 Fittings, Studs and Gasket
  • MSD Billet Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Steel Billet 4340 Internally Balanced Series Crank
+ $ 675.00
Oliver Steel I Beam Rod with L19 Rod Bolts
+ $ 975.00
Fel Pro MLS Head Gaskets Installed
+ $ 125.00
Jesel or T&D Shaft Rocker System
+ $1295.00
Street Heat Solid Roller 7/4 Swap Cam, NexTek or Pac Racing Solid Roller Springs and Titanium Retainers
+ $ 675.00
Jomar Light Weight Pro Series Stud Girdle
+ $ 225.00
Fully Ported Intake Manifold
+ $ 395.00
Jomar 1¼” Heat Sink CNC Ported Spacer Kit
+ $   75.00
AwesomeEngines® CNC Engraved Logo Powder Coated Covers with a Billet Oil Fill
+ $ 175.00
Moroso #21048 Pro Eliminator Steel Kick Out Drag Race Pan with Sectional Oil Control
+ $ 275.00
Moroso Billet 22163 Pro Series Oil Pump
+ $ 245.00

Dyno Tested & Tuned with 93° Exxon • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.