598ci BBC SD Magnum Short Block

598ci BBC SD Magnum Short Block

$11,275.00

598ci BBC Magnum SD Short Block, Dart Big M or World IV Steel Billet Cap Race Block, Callies Magnum Crank, Ultra I-Beam 4330M Timken Steel Rods, JE or Wiseco Quick 8 Big Chief or Quick 16 NOS Pistons, JE AP Steel Power Adder Severe Duty 043 043 3.0 mm Rings

 

Dart Big M or World Billet Cap Race Block 100% AwesomeEngines® CNC 4 Axis Perfectly Blue Print Final Machined to 9.800″ DH, 4.600″ Final Plate Honed and Radial Cleared for 4.500″ Stroke and Steel I Beam Rods  • Coated Cam Bearings, Small Parts Kit with Brass Freeze Plugs • Professionally Assembled by One of the Best Engine Builders in the World with the Rotator Listed

 

Callies Magnum 4.500″ 4340 Internally Balanced Steel Crank ­ ­• Callies Ultra I-Beam 4330M Timken Steel 6.535″ Rods • JE or Wiseco Custom 14.75:1 Quick 16 or Quick 8 Big Chief Gas Ported Coated Skirt Pro Series Pistons • 180 Wall Tool Steel Pins • JE AP Steel Power Adder 043 043 3.0 mm Rings • Clevite or King Race Series Main and Rod Bearings • Rear Main Seal

OPTIONS

Brodix or Dart Hipped Aluminum Light Weight Race Block
+ $4775.00
55 mm Roller Cam Bearings Installed
+ $450.00
.904″ Lifter Bores
+ $350.00
Callies XL 4340 Internally Balanced No Drill Crank Shaft with Heavy Metal is Included
+ $ 995.00
Callies EN30B Ultra Billet Light Weight No Drill Internally Balanced Best in the Business Power Adder Crank
+ $1295.00
JE or Wiseco Tool Steel .220″ Thick Wall Wrist Pins and Needed Heavy Metal
+ $ 275.00
Cam Shaft Kit; Bullet, Comp Cams or Erson Steel Billet 7/4 Swap Cam, Rollmaster IWIS Chain Billet Timing Kit
+ $950.00
Competition Cams or Erson Bushed Severe Duty Hippo Solid Roller Lifters
+ $1495.00
Isky Red Zone EZMAX Red Zone Bushed Ultra Duty Hippo roller Lifters
+ $1795.00
Jesel Belt Drive System
+ $1145.00
TCI SFI Approved Internally Balanced Verified Flexplate with ARP Bolt Kit
+ $ 225.00
Deluxe Short Block Kit; Pro Eliminator Oil Pan, ATI Super Dampener, 2 Piece Cover, Wix Race Filter, 7 Quarts of 10635 Lucas Break in Oil, Oil Pump Primed
+ $2685
Cometic or Fel Pro MLS Power Adder Head Gasket up to .051″ Thick
+ $245.00
ARP Head Stud Kit Plate Honed already in the Block so you Can Install the Induction System for EZ GO Racing for Your Heads You Have
+ $ 275.00

Cam Shaft Kit

Bullet, Competition Cams or Erson 7/4 Swap Steel Billet Roller Cam

Rollmaster Steel Billet Torrington Roller Bearing IWIS Chain Kit

Competition Cams Camshaft Button Lock Plate Bolt Kit

Cloyes 2 Piece Timing Cover and  TDC Pointer

Deluxe Short Block Kit

Bullet, Comp Cams, Erson 7/4 Swap Steel Billet Camshaft Kit

Moroso Pro Eliminator Pan, HV Oil Pump, Pick Up, Stud, Shaft 1 Piece Gasket

Napa Wix Racing Oil Filter and 7 Qts of Lucas # 10635 Break In 20w50 Oil and Primed

ATI SFI Approved Steel Super Dampener Specific Honed to Crank Shaft is Standard with Deluxe Kit

Complete Internally Balanced Short Blocks Come with Blue Print and Balance Sheet and all Product Information

Freight Applies to this Short Block Shipped to a Commercial Address or Nearest Freight Terminal for Pickup in the 48 States

Comments are closed.

Skip to toolbar