BBC 632ci 1090 Hp Pro Bullet Engine

BBC 632ci 1090 Hp Pro Bullet Race Engine

$18,475.00

10.195 – 0 -″ Deck | 4.600″ Bore | 4.750″ Stroke | 6.700″ Rods | 1090 Hp 7200 rpm

Components

  • Dart Big M or World IV Steel Billet Cap 4 Axis CNC Race Prepped Block
  • 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Dart or DuraBond Coated Cam Bearings and Block Small Parts Kit
  • 4340 Steel Billet Internally Balanced Center Counter Weight Crank Shaft
  • Molnar Severe Duty 4340 6.700″ H-Beam Steel Rods and ARP 2000 Bolts
  • King H Series Main and Rod Bearings
  • JE or Wiseco NOS 15.5:1 Quick 16 Gas Ported Coated Skirt Pistons
  • JE or Wiseco .180″ Wall 9310 Tool Steel Wrist Pins
  • JE Hell Fire or Total Seal TNT 043/043/3.0 mm File to Fit Rings
  • Competition Cams .800″ Lift 7/4 Swap Steel Billet Roller Camshaft
  • Competition Cams HD Bushed Hippo Roller Lifters
  • Cloyes 9-3747 Quick Adjust True Roller with Torrington Bearing
  • GM Chrome Timing with Cam Button and Thrust Set
  • ATI Super Dampener Specific Honed To Crank Shaft
  • Brodix HH 383 cc 24° 100% CNC Ported Oval Heads Flow 458-315 @.800″
  • Brodix 2.375 Intake and 1.850″ SS Exhaust Valves
  • PAC Racing Triple Valve Springs
  • Fel Pro MLS Multi-Layered Head Gaskets
  • Trend 7/16″ Taper Wall Push Rods
  • Jesel KPS-284139 or T&D #3124 1.75/1.7  Shaft Rocker System
  • AwesomeEngines Black Sheet Metal CNC Engraved Logo Valve Covers
  • Moroso #22175 Oil Pump  and Tig Welded Pick Up Kit
  • Moroso #21049 Pro Eliminator Kick Out Oil Pan
  • Brodix BM2021 100% CNC Match Ported Intake Manifold with Turtle
  • Jomar 2.0″ Heat Sink CNC Ported Spacer
  • Holley Ultra QFT 1450 cfm FX Carburetor
  • MSD Black Billet Distributor, Crank Trigger, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Dart Big M Pro 54mm Raised Cam, .904″ Lifter Steel Billet Cap Race Block
+ $ 595.00
Callies XL Light Weight Series Crank Internally Balanced with Heavy Metal Included 1100Hp
+ $1875.00
Head Hunter 395MC 24° Fully CNC Ported Heads Making 1130Hp @ 7600 rpm
+ $ 595.00
Isky EZ-Roll Helix Bushed Severe Duty Solid Roller Lifters Rated for 1400 lbs of Open Pressure
+ $ 575.00
Jesel Belt Drive System (RC Block $1295)
+ $ 895.00
Moroso #20385 Aluminum Oil Pan with Sectional Oil Control and Kick
+ $ 395.00
Moroso 22163 Billet Aluminum Oil Pump Kit with Integral Pick Up
+ $ 295.00
Moroso Complete Vacuum Pump System Installed and Dyno Tested with Engine
+ $1075.00
Power Master Ultra Starter, TCI SFI Flexplate and ARP Fasteners
+ $375.00

Dyno Tested and Tuned with 114 Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar