BBC 632ci 1080 Hp Bullet Race Engine

632ci 1080Hp BBC Bullet Racing Engine

$18,595.00

10.195″ Deck | 4.600″ Bore | 4.750″ Stroke | 6.700″ Rods | 865 lbs/1080Hp @5400/6800 rpm

Components

  • World IV Fully 4 Axis CNC Race Prepped Block
  • Head and Inner Valley Stud Kit Plate Honed with Block
  • Brass or Stainless Steel Lifetime Freeze Plug Kit Installed
  • Steel Billet 4.75″ Internally Balanced 4340 Crank
  • K1 or Manley H-Beam Rods and ARP2000 Bolts
  • Clevite or King “H” Race Series Main and Rod Bearings
  • JE Wiseco 15:1 Quick 16 Pro Series Gas Ported Coated Skirt Pistons
  • JE Wiseco .180″ Wall Wrist Pins
  • Total Seal TNT or Hell Fire 043-043-3.0 mm Low Tension Rings
  • Comp Cams .800″ 7/4 Swap Steel Billet Roller Camshaft
  • Cloyes 9-3747 Quick Adjust Billet True Roller with Torrington
  • Cloyes 3 Piece Polished Aluminum Timing Cover
  • Comp Cams NBO Bushed HIPPO Roller Lifters
  • ATI Super Damper and Billet TDC Verified Pointer
  • Brodix Oval Port 365cc Fully CNC Ported Heads 452/308
  • Brodix 2.350-50°/1.880-45° Stainless Steel Valves
  • Manley or PAC Triple Springs
  • Manley or PAC Titanium 10° Retainers
  • Fel Pro MLS Multi-Layered Severe Duty Head Gaskets
  • Trend Taper-Wall 7/16 x .165″ Severe Duty Push Rods
  • Comp Cams Pro Magnum Rockers and Jomar Stud Girdle
  • AwesomeEngines® CNC Engraved Logo Valve Covers
  • Moroso Complete Oil Pump Kit
  • Moroso #21049 Pro Eliminator Kick Out Oil Pan
  • Pro Filer Sniper CNC Match Ported Intake and Jomar Spacer
  • Holley or QFT 1450 cfm FX Race Series Carburetor
  • AwesomeEngines® Moroso Wires, MSD Distributor and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Steel Billet Main Caps Installed
+ $495.00
Lite Version Brodix or Dart Block with Raised 55MM Camshaft Upgrade
+ $4795.00
Callies Magnum Series Internally Balanced Crank (may require heavy metal @ $75 per slug)
+ $1295.00
Oliver Steel I Beam Rods (Callies Ultra Series I Beam Rods L19 Bolts $1195)
+ $ 995.00
JE Wiseco .200″ Wall Tool Steel Wrist Pins (may require heavy metal @75 per slug)
+ $ 195.00
Isky RED ZONE NBO Bushed Hippo Roller Lifters
+ $595.00
Jesel Belt Drive Installed
+ $995.00
Titanium 2.350″ Intake Valves and Copper Beryllium Seats
+ $895.00
Jesel T&D Shaft Rocker System and Upgraded .850″ Roller Camshaft
+ $1295.00
Moroso Complete Vacuum Pump System Completely Installed
+ $995.00
Moroso Billet #22171 Billet Oil Pump
+ $ 295.00
Moroso Aluminum #20385 Pro Eliminator Kick Out Style Oil Pan
+ $ 295.00
MSD Crank Trigger
+ $295.00
Ultra SFI 168 Tooth Flex-plate in House Balanced and ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Starter
+ $245.00

Dyno T&T using 112 Fuel • Vacuum Pump • Crank Trigger • Corrected to Sea Level

Comments are closed.