BBC 632ci 910 Hp Pro Street Engine

BBC 632ci 910Hp Pro Street Crate Engine

$16,995.00

Complete Pro Street Engines are some of the best you can buy.  Built for just Pounding the Street and Having Safe Fun

10.195″ Deck | 4.600″ Bore | 4.750″ Stroke | 6.760″ Rods | 910Hp @ 6600 rpm

(see 632ci 910hp actual dyno pull)

Components

  • Merlin IV Tall Deck Studded Splayed Main Cap Block
  • Brass or Stainless Steel Freeze Plugs Installed
  • AR-Pro Series Head and Inner Valley Stud Kit
  • Dart or Manley 4340 Internally Balanced 4.750″ Crank
  • K1 or Manley H-Beam 6.760″ Rods with ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • JE Wiseco Gas Ported Coated Skirt 11:1 Forged Pistons
  • Total Seal Plasma Moly .043/.043/3.0 mm Lightweight Ring Set
  • Comp Cams Custom New Design Hydraulic Roller Cam
  • Cloyes Double Roller Timing Chain Kit with Torrington Bearing
  • Cloyes Aluminum Timing Cover with Roller Bearing and Billet TDC
  • Comp Cams Short Travel (DRST) Hydraulic Roller Lifters
  • ATI SFI Approved Internally Balanced Super Damper
  • Dart Pro 2 380cc Fully CNC Ported Aluminum Heads
  • Dart 2.350″ x 1.880″ Stainless Steel Valves
  • Comp Cams or PAC Racing Hyd Roller Springs and Tool Steel Retainers
  • 1057 Fel Pro Head Gaskets w/all Other Race Gaskets
  • Manley 3/8 x .135″ wall Push Rod Set
  • Comp Cams Pro Magnum Roller Rocker Arms and Jomar Stud Girdle
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso 22185 Oil Pump Kit
  • Moroso Pro Eliminator Steel Oil Pan 7qt. with Side Kick Out
  • ProFiler Sniper 100% CNC Match Ported Intake and Jomar Spacer
  • Holley or QFT 1450 cfm Pro Street Carb, #6 Fittings, Stud Kit and Gasket
  • MSD Large Black Cap Billet Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Don’t See an Option You Want, Just Give Us a Call

Dart Raised Cam or Brodix Aluminum Race Block Fully CNC Race Prepped 110lbs Lighter than iron block
+ $3995.00
Callies Magnum 4340 No Drill Internally Balanced Crank and all the Heavy Metal Included
+ $1495.00
Callies XL Best in the Business No Drill Internally Balanced Crank and all the Heavy Metal Included
+ $1995.00
Callies, Crower or Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 995.00
Oring Block, Install Stainless Steel Wire, CNC Receiver Groove Heads
+ $ 295.00
Jesel or T&D Shaft Rocker System
+ $1295.00
JESEL Belt Drive System Installed (required block clearance included)
+ $1295.00
Tunnel Ram 100% CNC Match Ported Intake Manifold, Holley or QFT 2nd Carb and Complete Linkage Installed
+ $1995.00
FAST or HOLLEY EFI Complete Electronic Fuel Supply System Dyno Tested and Tuned Turn Key
+ $2995.00
Power Master High Torque Made in the USA Starter, SFI 168 Tooth Internally Balanced Flex-Plate and ARP Bolt Kit
+ $ 395.00
Billet Specialties or March Pro Street Pulley Systems with any Form of Accessories Needed (from)
+ $ 795.00
XHD 10″ Proper Torque Converter For Your Particular Application, Gear Ratio, Tire and Transmission
+ $ 995.00
AwesomeGlide 1400Hp T-Brake, 300 M, 8-Pack Direct, 1.80 Gear Set w/All HD Components
+ $2695.00
TH400 w/Trans Brake and Complete Race Pack w/New HD Direct Drum and HD Upgraded Components (rated 1200hp)
+ $2695.00

Dyno Tested and Tuned Using Exxon 93° Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.