BBC 632ci 920 Hp Pro Street Crate Engine

BBC 632ci 920 Hp Pro Street Crate Engine

$16,750.00

Pro Street Crate Engines are enhanced with 100% CNC ported heads, match ported intakes, aggressive camshaft all for Pro Street, Drag and Marine applications that are dyno tested for maximum HP. Best in the business professionally 100% machined on a 4 axis CNC Centroid block machining center, assembled, Dyno Tested and Tuned by me.

10.200″ Deck | 4.600″ Bore | 4.750″ Stroke | 6.700″ Rods | 920Hp @ 6600 rpm

(see 632ci actual dyno pull)

Components

  • Dart or World IV Tall Deck Studded Splayed Main Cap Block
  • Coated Cam Bearings and Block Small Parts Kit
  • ARP Pro Series Head and Inner Valley Stud Kit
  • Dart or Manley 4340 Internally Balanced 4.750″ Crank
  • K1 Steel Billet or Manley H-Beam 6.700″ Rods with ARP 2000 Rod Bolts
  • Clevite King Race Series Main and Rod Bearings
  • JE or Wiseco Gas Ported Coated Skirt 10.95:1 Forged Pistons
  • Total Seal Plasma Moly .043/.043/3.0 mm Lightweight Ring Set
  • Comp Cams or Erson Hydraulic Roller Cam
  • Comp Cams Drag Race Short Travel Hippo Hydraulic Roller Lifters
  • Cloyes Double Roller Timing Chain Kit with Torrington Bearing
  • Cloyes Aluminum Timing Cover with Roller Bearing and Billet TDC
  • ATI SFI Approved Internally Balanced Super Damper
  • Dart PRO2 380cc Fully CNC Ported Aluminum Heads 434/330@.800
  • Dart 2.350″ x 1.850″ Stainless Steel Valves
  • PAC Racing Hydraulic Roller Springs and Tool Steel Retainers
  • Fel Pro 1057 Head Gaskets w/all Other Race Gaskets
  • Manley 3/8 x .135″ wall Push Rod Set
  • Comp Cams Pro Magnum Rockers and Dart 64110001 Stud Girdle
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso 22175 Oil Pump Kit
  • Moroso Pro Eliminator Steel Oil Pan 7qt. with Side Kick Out
  • Dart 100% CNC Match Ported Intake and Jomar 1¼” Spacer
  • Holley or QFT 1450 cfm Carburetor, #6 Fittings, Stud Kit and Gasket
  • MSD Billet Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Frieght

OPTIONS

Dart or Brodix Raised Cam Aluminum Race Block Fully CNC Race Prepped 110 lbs Lighter than iron block
+ $4775.00
Callies Magnum 4340 No Drill Internally Balanced Crank and all the Heavy Metal Included
+ $1795.00
Callies XL Best in the Business No Drill Internally Balanced Light Weight Crank and all the Heavy Metal Included
+ $2275.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 875.00
Callies Ultra I Beam Rods with L19 ARP Rod Bolts
+ $1075.00
Jesel or T&D Shaft Rocker System
+ $1275.00
Jesel Belt Drive System
+ $ 875.00

Dyno Tested and Tuned with 93° Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Advertised Engine Shipped to a Commercial Address or the Terminal Closest to your Zip Code for Pickup

Comments are closed.