BBC 632ci 950 Hp Ultra Pro Street Engine

BBC 632ci 950 Hp Ultra Pro Street Engine

$19,450.00

Ultra Pro Street Engines are enhanced with 100% CNC ported heads and intake manifold, an aggressive camshaft for Pro Street, Drag that are dyno tested for maximum HP. Best in the business professionally 100% machined on a 4 axis CNC Centroid block machining center, assembled, Dyno Tested and Tuned by me Turn Key Engine with updated 2020 internals, Cylinder Heads, Induction, Camshaft and Lifters

10.200″ Deck | 4.600″ Bore | 4.750″ Stroke | 6.760″ Rods | 950Hp @ 7000 rpm

(see 632ci actual dyno pull)

Components

  • Dart or World IV Tall Deck Splayed Main Cap Race Block
  • Coated Cam Bearings and Block Small Parts Kit
  • ARP Pro Series Head and Inner Valley Stud Kit
  • Molnar or Manley 4340 Internally Balanced 4.750″ Crank
  • Molnar Severe Duty H-Beam 4340 Rods with ARP 2000 Rod Bolts
  • Clevite King Race Series Main and Rod Bearings
  • JE or Wiseco Gas Ported Coated Skirt 10.95:1 Forged Pistons
  • Total Seal Plasma Moly .043/.043/3.0 mm Lightweight Ring Set
  • Competition Cams 7/4 Swap Steel Billet Roller Cam
  • Competition Cams HD Bushed No Needle Bearing Roller Lifters
  • Cloyes Double Roller Timing Chain Kit with Torrington Bearing
  • Cloyes Aluminum Timing Cover with Roller Bearing and Billet TDC
  • ATI SFI Approved Internally Balanced Super Damper
  • Dart PRO2 380cc Fully CNC Ported Aluminum Heads
  • Dart 2.350″ x 1.850″ Stainless Steel Valves
  • PAC Racing Solid Roller Springs and Tool Steel Light Weight Retainers
  • Fel Pro 1077 MLS Severe Duty Head Gaskets
  • Manley 3/8 x .135″ wall Push Rod Set
  • Comp Cams Pro Magnum Rockers and Dart 64110001 Stud Girdle
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso 22175 Oil Pump Kit
  • Moroso Pro Eliminator Steel Oil Pan 7qt. with Side Kick Out
  • Dart 100% CNC Match Ported Intake and Jomar 1¼” Spacer
  • Holley or QFT 1450 cfm Carburetor, #6 Fittings, Stud Kit and Gasket
  • MSD Billet Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

55mm Cam Bearings and Roller Camshaft with .904 Lifter Bore and Lifters
+ $ 975.00
Steel Billet Main Caps
+ $ 495.00
Dart Hipped Block or Brodix Raised Cam Aluminum Race Block Fully CNC Race Prepped 110 lbs Lighter than Iron Block
+ $4775.00
Callies Magnum 4340 No Drill Internally Balanced Crank and all the Heavy Metal Included
+ $1495.00
Nitrous Package Including JE Hell Fire Rings, .180″ Tool Steel Thick Wall Wrist Pins
+ $ 375.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 875.00
Callies Ultra I Beam Rods with L19 ARP Rod Bolts
+ $1075.00
Jesel or T&D Shaft Rocker System
+ $1275.00
Jesel Belt Drive System
+ $ 875.00

Dyno Tested and Tuned with 93° Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Advertised Engine Shipped to a Commercial Address or the Terminal Closest to your Zip Code for Pickup

Comments are closed.

Skip to toolbar