BBC 632ci 960 Hp Bracket Race Engine

BBC 632ci 960Hp Bracket Race Engine

$13,995.00

10.195″ Deck | 4.600″ Bore | 4.750″ Stroke | 6.700″ Rods | 960Hp @ 6800 rpm

Components

  • Dart Big M or World IV Splayed Cap 100% CNC Race Prepped Block
  • Dart or Durabond Coated Cam Bearings and Block Small Parts Kit
  • ARP Head and Dart Inner Valley Stud Kit Plate Honed with Block
  • K1 4340 Internally Balanced Steel Crank
  • K1 Steel Billet H Beam 4340 Steel Rods with ARP 2000 Bolts
  • Clevite or King Racing Bearings
  • JE or Wiseco Quick 16 Gas Ported 14.75:1 Pistons
  • JE or Wiseco .180″ Wall Wrist Pins
  • GFX, Total Seal Stainless Steel, TNT or Hell Fire .043 File to Fit Ring Set
  • Comp Cams .800 Lift 7/4 Swap Solid Roller Camshaft
  • Comp Cams Hippo Solid Roller Lifters
  • Cloyes Billet Double Roller with Torrington Bearing
  • GM Chrome Timing Cover and Billet TDC Pointer
  • ATI Super Damper Specific Honed to Fit Internally Balanced

  • Brodix BB-3 XTRA 363cc Cylinder Heads .800″ 433/280
  • PAC Racing .850″ Lift Double Springs and Titanium 10° Retainers
  • Fel Pro 1057 High Performance Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rods
  • Harland Sharp 1.7/1.7 Rockers
  • Jomar Light Weight Pro Series Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso 22175 Complete Oil Pump Kit
  • Moroso 20406 Stroker 7qt Total Drag Race Oil Pan
  • Brodix or ProFiler Jr. 100% CNC Match Ported 4500 Intake
  • Jomar CNC Ported 1¼” Spacer (optional)
  • Holley or QFT 1450 CFM Carburetor (optional)
  • MSD Billet Distributor, 8.5mm Wires and NGK Plugs (optional)
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Cometic or Fel Pro MLS Head Gaskets
+ $ 125.00
BP BB-3 XTRA O 365cc 100% CNC Ported Heads with 2.350/1.880 Valves and CNC Match Ported Intake 1075Hp
+ $1295.00
Comp Cams Bushed Rev Zone Solid Roller Lifters
+ $ 575.00
Trend Taper-Wall 7/16 x .165″ Severe Duty Push Rods Clearances for Cylinder Heads Included
+ $ 275.00
Jesel or T&D 1.7 Shaft Rockers
+ $1275.00
Jesel Belt Drive System
+ $ 875.00
MSD Black or Red Large Ford Cap Billet Distributor with Gear for Steel Billet Roller Cam and 8.5 mm MSD Wires and NGK Race Plugs
+ $ 495.00
Moroso #21047/9 Eliminator Steel Side Kick Out Oil Pan
+ $ 275.00
Moroso Complete Vacuum Pump System Installed and Dyno Tested with Engine
+ $1075.00
Holley or QFT 1450 CFM Carburetor, Jomar 1¼” CNC Heat Sink Spacer, Studs, Gaskets, #6 Fittings
+ $1275.00
MSD Crank Trigger System Dyno Tested and Tuned with Engine
+ $ 275.00
AwesomeEngines® Sheet Metal CNC Engraved Power Coated Black Valve Covers
+ $ 350.00

Dyno Tested and Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • 21047 Pan • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.