BBC 648ci 1170 Hp Pro Magnum Race Engine

648ci 1170Hp BBC Pro Magnum Race Engine

$27,975.00

10.400″ Deck | 4.600″ Bore | 4.875″ | 6.800″ Rods | 1005lbs @5500/1165Hp @7300 rpm

Components

  • Dart Big M Pro Raised .600″ Cam Race Block 2.125″/54.0 mm Cam
  • ARP Head and Dart Inner Valley Stud Kit Plate Honed w/Block
  • Callies BB142B Magnum Series 4340 Internally Balanced Crank
  • Callies Ultra I-Beam Rods with L19 Bolts
  • King Race Series Cam Main and Rod Bearings
  • Wiseco 16:1 Quick 16 Pistons Gas Ported Coated Skirt Pistons
  • Trend .240″ Wall Tool Steel Wrist Pins
  • Total Seal 043/043/3mm Stainless Steel or TNT N2O Ring Package
  • 54mm Comp Cams .900″ Steel Billet 7/4 Cam
  • Jesel +.600″ Raised Cam Pro Series Belt Drive System Installed
  • Comp Cams .904″ HIPPO Bushing Roller Lifters
  • ATI Super Dampener Specific Honed To Crank Shaft
  • TDC Verified with ATI Billet TDC Pointer

  • Brodix Head Hunter 395MC Fully CNC Ported Heads
  • Titanium Intake 2.400 x 1.850″ Inconel Severe Duty Exh. Valves
  • PAC Racing Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Trend 7/16 x .165″ Taper-Wall Extreme Duty Push Rods
  • JESEL or T&D 1.8/1.8 Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Logo Powder Coated V/Covers
  • AwesomeEngines® Moroso 22167 Billet Oil Pump
  • AwesomeEngines® Moroso Wide Aluminum Pro Eliminator Oil Pan
  • Brodix CNC Match Ported Intake and Jomar 3D CNC Ported Heat Sink Spacer
  • QFT 1450cfm FX Carburetor
  • MSD Distributor, Crank Trigger, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Dart #31264695 Aluminum +400″ Raised Cam Block Fully CNC Race Prepped with .904″ Lifter Bore, Special Head Stud Kit and Dart #67240002 Timing Cover
+ $4495.00
Brodix #8B2000C Aluminum +400″ Raised Cam Block Fully CNC Race Prepped, with .904″ Lifter Bore and Special Head Stud Kit
+ $4795.00
Callies Magnum XL Series 59lb Light Weight Cranki Internally Balanced NO Drill Balance with Heavy Metal Included
+ $1495.00
GRP Pro Mod Aluminum Connecting Rods with Clearance Machine Work
+ $ 575.00
Trend .300 x .250″ Taper Wall Tool Steel Wrist Pins (will require 2 pieces of heavy metal)
+ $ 495.00
T&D Shaft Rocker System w/Upgrade Roller Tip Bearing
+ $ 200.00
Moroso Complete Vacuum Pump System Dyno Tested with Engine
+ $1095.00
Moroso Aluminum Special Pick Oil Pan and External Single Stage Oil Pump
+ $ 675.00
ATI SFI 168 Tooth Flex-plate Internally Balanced in House and ARP Flexplate Bolts
+ $ 275.00
Power Master Ultra Made in the USA Starter
+ $ 250.00
Nitrous Express Complete Plate System from 100-500Hp
+ $1095.00
Nitrous Express 200-600Hp Shark System with L250 Low Amp Solenoids, Cometic or Fel Pro MLS Head Gaskets and .240″ Wall Tool Steel Pins
+ $1795.00
BIG DAWG NOS Steel Stator Natural or NOS Style Torque Converter with One Year Warranty Against Breakage of Anything
+ $1595.00
New PRO DADDY 2000Hp Power Glide with Roller Bearing Extension and All Top Shelf Internals
+ $3975.00

Dyno Tested and Tuned Using C16 Race Fuel • Corrected to Sea Level • Vacuum Pump Used

Free Freight up to $500 Applies to this Engine Shipped to a Commercial Address or the Terminal Closest to Your Zip Code for Pickup in the 48 states

Comments are closed.