BBC TD 598ci 800 Hp Pro Street Engine

BBC TD 598ci 800 Hp Pro Street Engine

$13,995.00

Built for Hi-Performance Muscle Cars, Hot Rods, Pro Street, Drag, even Marine Applications. Upgraded SD World IV splayed cap race block. Every critical area for these applications to provide rock solid long lasting power and fun has been addressed Completely and Upgraded

10.175″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.800″ Rods | 800Hp @ 6600 rpm

Components

  • World IV Short Deck Splayed Main Cap 100% CNC Machined Block
  • Head and Inner Valley Stud Kit
  • Brass or Stainless Steel Freeze Plugs Installed
  • Eagle or Scat 4.500″ 4340 Internally Balanced Steel Crank
  • K1 4340 H-Beam Rods with ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • JE or Wiseco 11:1 Forged Pistons
  • Total Seal Moly Ring Set
  • Comp Cams Custom Hydraulic Roller Cam
  • Cloyes Double Roller Timing Set with Torrington Bearing
  • Chrome Timing Cover, TDC Pointer TDC Verified
  • Comp Cams HIPPO Hydraulic Roller Lifters
  • SFI Approved Internally Balanced Harmonic Damper
  • Brodix BB3 Extra 363cc Aluminum Heads
  • Brodix 2.300″ x 1.880″ Stainless Steel Valves
  • PAC Racing Hydraulic Roller Springs and Retainers
  • 1057 Fel Pro Head Gaskets
  • Manley 3/8 x .135″ Wall Push Rod Set
  • Comp Cams Magnum 1.7 Roller Rockers
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso #22175 Oil Pump Kit
  • Moroso #20406 6qt Capacity 8″ Deep Oil Pan
  • ProFiler 4500 CNC Match Ported Intake and Phenolic Spacer
  • Holley or QFT 1150 cfm Carburetor, #6 Fittings, Studs and Gasket
  • MSD Black Billet Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Any Other Upgrade or Option not Listed is Available (call)

Steel Billet 4340 Internally Balanced Series Crank
+ $ 695.00
Oliver Steel I Beam Rod with L19 Rod Bolts
+ $ 995.00
MAXX Pro Street 850Hp 100% CNC Ported BP BB-3 Xtra O 365 cc Cylinder Heads and Matching Brodix 100% CNC Match Ported Intake
+ $1295.00
Fel Pro MLS Head Gaskets Installed
+ $ 95.00
Crower, Jesel or T&D Pro Series Shaft Rocker System
+ $1295.00
MAXX Pro Street Solid Roller 7/4 Swap Cam, Nex Tek or PAC Racing Solid Roller Springs and Titanium Retainers
+ $ 695.00
Jesel Belt Drive System Installed (required block clearance included)
+ $ 995.00
Power Master High Torque Made in the USA Starter, SFI 168 Tooth Flex-Plate and ARP Bolt Kit
+ $ 395.00
Pro-Filer Sniper Fully Ported Intake Manifold
+ $ 395.00
Holley or Ultra QFT FX Series 1250cfm Carburetor
+ $ 195.00
AwesomeEngines® CNC Engraved Logo Powder Coated Covers with a Billet Oil Fill
+ $ 195.00
Moroso #21048 Pro Eliminator Steel Kick Out Drag Race Pan with Sectional Oil Control
+ $ 275.00
Moroso Billet 22163 Pro Series Oil Pump
+ $ 245.00
Complete Turn Key EFI Fast System Installed and Dyno Tested For Maxx Pro Street Applications NOW ONLY
+ $1995.00

Dyno Tested and Tuned Using Exxon 93° Pump Gas • Vacuum Pump •  HP Corrected to Sea Level

Comments are closed.