Brodix IK Series Aluminum Cylinder Heads

Brodix Ik Series 180 or 200cc Aluminum SBC Heads

$995.00 Complete Pair

Brodix Ik Series 180 or 200cc aluminum racing heads are some of the best out of the box heads made by Brodix. Just pick the runner size you need for your size engine, what ever upgrade you may want and your done. Brodix heads use only Broidx valves, Brodix Pac or Manley springs, valve locks, retainers, Brodix guide plates and rocker studs.

 

Components

  • Brodix 180 or 200cc SBC Aluminum Cylinder Heads
  • Brodix Multi Angle 45° Intake and Exhaust Valve Job
  • 2.02/1.600 Intake and Exhaust CNC Machined Valve Job
  • 64 or 70cc Combustion Chambers
  • Ductile Iron Valve Seats
  • Fully Machined Valve Guides .530″ Seal
  • Utilizes Existing SBC Intake Manifolds
  • Uses Standard SBC Header Pattern but Raised .300″ Higher
  • Uses Standard SBC Rocker Arms
  • All Stock Hardware Bolts Directly to the Cylinder Heads
  • Increased Deck Thickness to Support Power Adders
  • Accessory Bolt Holes In Stock Location
  • Bare or Complete Package Kits Are Available
  • 180cc Head Flows Over 245 cfm with the 2.02 Valve Job
  • 200cc Heads Flow Over 260 cfm with the 2.02 Valve Job
  • Brodix Stainless Steel Valves are Used in Package Heads
  • All Valve Seats Checked to Insure the Perfect Seal and Valve Job
  • 1.250 Springs for up to .550″ Lift Cam Hydraulic Flat Tappet Cam
  • 1.470 Springs for up to .600″ Lift Hydraulic Roller or Flat Tappet Cam
  • Retainers for Either Springs used with Valve Locks
  • U.S. PC Valve Stem Seals Installed (we never leave these off)
  • Hardened Spring Seats or Washers
  • Rocker Studs and 5/16 Guide Plates Supplied
  • Hot Washed Blown Dry, Lubed and Final Spring Set to Specifications

Available Upgrades

Flat Milling for Smaller Combustion Chambers to 60cc
+ $ 100.00
Manley 2.02 Intake and 1.60 Severe Duty Intake and Exhaust Valves; Bolt Sets
+ $ 350.00
Manley Extreme Duty and Marine Enconel Exhaust Valves
+ $ 295.00
Titanium Intake Valves are Available with Copper Beryllium Valve Seat Installed
+ $ 990.00
Double Roller Valve Springs and Titanium Retainers for 700″ Lift Package (requires stud girdle or shaft rockers)
+ $ 350.00
Pro Series Specific Fit Head Stud Kit with ½” 12 Point Fasteners for Easy Installation and Clearance Issues
+ $ 90.00
Comp Cams Pro Magnum Light Weight Roller Rockers in a 1.5 or 1.6 Ratio Available
+ $ 370.00
Jomar Complete Stud Girdle Kit with all Hardware and Adjusting Nuts
+ $ 195.00
T&D any Ratio Pro Series Shaft Rocker System
+ $1290.00
Jesel any Ratio Pro Series Shaft Rocker System
+ $1490.00
Fel Pro MLS Head Gaskets (up to 4.640 bore size and .053″ thickness, other sizes available)
+ $ 170.00
ARP Specific Fit Head Bolt Set
+ $  95.00
ARP Specific Fit Pro Series Head Stud Kit with Hex Fasteners and Washers
+ $ 160.00
Brodix Dual or Single Plane Intake Manifold
+ $ 275.00
Jomar Special CNC Ported 1¼” Spacer, Stud, Gaskets that actually makes up to 5hp and 10lbs of torque
+ $ 120.00

All Completed Heads Come with Specific Build Sheet, all Part numbers, Spring Rates and Installed Height Settings

Comments are closed.