The PRO BRACKET series race engines were designed for the real bracket racer with a reasonable budget expectation, while still maintaining the industry’s finest parts and best workmanship available at these prices. This series of racing engines will produce excellent throttle response, round after round consistent e.t. and performance for any type of racing.

The Dart Big M block is the foundation we build upon. For the 2008 season, these engines will come with a set of 360cc fully CNC ported aluminum heads from Direct Motion. This will give all racers the same consistency and power from port to port in order to provide an even more consistent race package with the much needed hp to compete against the big MPH finish line races!

Components

• Dart #31273654 Big M Splayed Cap 10.2″ x 4.6″ Race Prepped Block
• AERC 4340 4¾” Int/Bal Center Counter Weighted Crankshaft with a .125″ Radia
• AERC 4340 6.7′ H-Beam 3-D Connecting Rods with ARP 8740 Bolts
• Wiseco 14.5:1 Pro Series 2618 Pistons (no je/srp or protrue)
• Total Seal Plasma Moly 1/16 x 1/16 x 3/16 Low Tension File to Fit Rings
• ACL or Clevite “H” Series Main and Rod Racing Engine Bearings
• Dart Special Coated Low Friction Cam Bearings
• Direct Motion 360cc Fully CNC Ported Aluminum Cylinder Heads
• Manley or Precision 2.3″ x 1.88″ Stainless Steel Valves
• Associated .810″ Lift 1.625″ Roller Valve Springs
• Comp Cams 10° Retainers and 10° Valve Locks
• Fel Pro #1057 Perma Torque Head Gaskets
• Manley or Comp Cams 3/8″ x .080″ Wall Push Rods
• Holley 1150cfm Dyno Tested & Tuned Dominator Carburetor
• Weiand New Clean Cast Team G Stage 1 Match Ported Intake Manifold
• PRW Stainless Steel 1.7 Ratio Heavy Duty Roller Rocker Arms
• Jomar 1 Piece Pro Series Lightweight Stud Girdle
• Comp Cams or Lunati Custom Solid Roller Camshaft
• Lunati-Morel-PBM +.300″ Extreme Duty Vertical Bar Roller Lifters
• Roll Master Billet True Roller Timing Set with Torrington Bearing
• GM Chrome Style Timing Cover with TDC Verifed Pointer
• Moroso #20405 7qt. Competition Oil Pan & Pickup
• Melling M77 High Volume Oil Pump
• PRW 6¼” Lazer Etched SFI Balancer TDC Verified
• ARP or Manley 190,000 psi Head Bolts
• MSD #8489 Billet Slip Collar Distributor
• Autolite AR3934 Racing Spark Plugs
• Awesome Engines Polished Aluminum CNC Engraved Valve Covers

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold, give us a call or email us for a quote. Ships VIA UPS truck freight. (engines dyno tested with crank trigger, vacuum pump, Q13 VP fuel, 10/10 racing oil, DamBest carb with 1″ B&B special spacer, kick out style Moroso #21047 oil pan, Jesel sportsman rockers, .135″ Trend Push Rods, ATI lightweight damper, Sniper Jr. Match Ported Intake)

Upgrades

 Print This Ad

The PRO BRACKET series race engines were designed for the real bracket racer with a reasonable budget expectation, while still maintaining the industry’s finest parts and best workmanship available at these prices. This series of racing engines will produce excellent throttle response, round after round consistent e.t. and performance for any type of racing.

The Dart Big M block is the foundation we build upon. For the 2008 season, these engines will come with a set of 360cc fully CNC ported aluminum heads from Direct Motion. This will give all racers the same consistency and power from port to port in order to provide an even more consistent race package with the much needed hp to compete against the big MPH finish line races!

Components

• Dart #31273654 Big M Splayed Cap 10.2″ x 4.6″ Race Prepped Block
• AERC 4340 4½” Int/Bal Crankshaft with a .125″ Radia
• AERC 6.8″ or 6.7″ 4340 H-Beam 3-D Connecting Rods w/ARP 8740 Bolts
• Wiseco 14.25:1 Pro Series 2618 Pistons (no je/srp or protrue)
• Total Seal Plasma Moly 1/16 x 1/16 x 3/16 File to Fit Low Tension Rings
• ACL or Clevite “H” Series Racing Engine Bearings
• Dart Special Coated Low Friction Cam Bearings
• Direct Motion 360cc Fully CNC Ported Aluminum Cylinder Heads
• Manley or Precision 2.3″ x 1.88″ Stainless Steel Valves
• Associated .810″ Lift 1.625″ Roller Valve Springs
• Comp Cams 10° Retainers & 10° Valve Locks
• Fel Pro #1057 Perma Torque Head Gaskets
• Manley or Comp Cams 3/8″ x .080″ Wall Push Rods
• Holley 1150cfm Dyno Tested & Tuned Dominator Carburetor
• Weiand New Clean Cast Team G Stage 1 Match Ported Intake Manifold
• PRW Stainless Steel 1.7 Ratio Heavy Duty Roller Rocker Arms
• Jomar 1 Piece Pro Series Lightweight Stud Girdle
• Comp Cams or Lunati Custom Solid Roller Camshaft
• Lunat-Morel-PBM +.300″ Extreme Duty Vertical Bar Roller Lifters
• Roll Master Billet True Roller Timing Set with Torrington Bearing
• GM Chrome Style Timing Cover with TDC Verified Pointer
• Moroso #20405 7qt. Competition Oil Pan & Pickup
• Melling M77 High Volume Oil Pump
• PRW Lazer Etched 6¼” SFI Balancer TDC Verified
• ARP or Manley 190,000 psi Head Bolts
• MSD #8489 Billet Slip Collar Distributor
• Autolite AR3934 Racing Spark Plugs
• Awesome Engines Polished Aluminum CNC Engraved Valve Covers

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold, give us a call or email us for a quote. Ships VIA UPS truck freight. (engines dyno tested with crank trigger, vacuum pump, Q13 VP fuel, 10/10 racing oil, DamBest carb with 1″ B&B special spacer, kick out style Moroso #21047 oil pan, Jesel sportsman rockers, .135″ Trend Push Rods, ATI lightweight damper, Sniper Jr. Match Ported Intake)

Upgrades

 Print This Ad

The PRO BRACKET series race engines were designed for the real bracket racer with a reasonable budget expectation, while still maintaining the industry’s finest parts and best workmanship available at these prices. This series of racing engines will produce excellent throttle response, round after round consistent e.t. and performance for any type of racing.

The Dart Big M block is the foundation we build upon. For the 2008 season, these engines will come with a set of 360cc fully CNC ported aluminum heads from Direct Motion. This will give all racers the same consistency and power from port to port in order to provide an even more consistent race package with the much needed hp to be competitive in todays racing.

Components

• Dart #31273644 Big M Splayed Cap 9.8″ x 4.6″ Race Prepped Block
• AERC 4¼” 4340 Internally Balanced AERC House 69lb Crankshaft
• AERC 6.535″ 4340 H-Beam 3-D Connecting Rods w/ARP 8740 Bolts
• Wiseco 14:1 Pro Series 2618 Pistons (no je/srp or protrue)
• Total Seal Plasma Moly 1/16 x 1/16 x 3/16 File to Fit Low Tension Rings
• ACL or Clevite “H” Series Race Engine Bearings
• Dart Special Coated Low Friction Cam Bearings
• Direct Motion 360cc Fully CNC Ported Aluminum Cylinder Heads
• Manley or Precision 2.3″ x 1.88″ Stainless Steel Valves
• Associated .810″ Lift 1.625″ Roller Valve Springs
• Comp Cams 10° Retainers & 10° Degree Locks
• Fel Pro #1057 Perma Torque Head Gaskets
• Manley or Comp Cams 3/8″ x .080″ Wall Push Rods
• Holley 1050cfm Dyno Tested & Tuned Dominator Carburetor
• Weiand New Clean Cast Team G Stage 1 Match Ported Intake Manifold
• PRW Stainless Steel 1.7 Ratio Heavy Duty Roller Rocker Arms
• Jomar 1 Piece Pro Series Lightweight Stud Girdle
• Comp Cams or Lunati Custom Grind Solid Roller Camshaft
• Lunati-Morel-PBM +.300″ Extreme Duty Vertical Bar Roller Lifters
• Roll Master Billet True Roller Timing Set with Torrington Bearing
• GM Chrome Style Timing Cover with TDC Verified Pointer
• Moroso #20405 7qt. Competition Oil Pan & Pickup
• Melling M77 High Volume Oil Pump
• PRW Lazer Etched 6¼” SFI Balancer TDC Verified
• ARP or Manley 190,000 psi Head Bolts
• MSD #8489 Billet Slip Collar Distributor
• Autolite AR3934 Racing Spark Plugs
• Awesome Engines Polished Aluminum CNC Engraved Valve Covers

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold, give us a call or email us for a quote. Ships VIA UPS truck freight. (engines dyno tested with crank trigger, vacuum pump, Q13 VP fuel, 10/10 racing oil, DamBest carb with 1″ B&B special spacer, kick out style Moroso #21047 oil pan, Jesel sportsman rockers, .135″ Trend Push Rods, ATI lightweight damper, Sniper Jr. Match Ported Intake)

Upgrades

 Print This Ad

The Pro Bracket series of race engines have been designed for the real bracket racer with a reasonable budget. For these prices, our customers receive a package that has been assembled using the industry’s finest products in combination with our quality workmanship.

Our foundation is built upon Dart’s Little M series of racing engine blocks, and for the remainder of the 2008 season will include a Dart Pro 1 fully CNC ported cylinder head package, a Dart intake manifold, and a Dart block kit. These engines are built to provide throttle response, power, round for round consistency, durability, and performance for almost any type of performance racing.

Our engines come complete and race ready. Any and all upgrades are available upon request. Check out the new standards found in Awesome Engines, as we will not be undersold! Give us a call, or contact us by email for a custom quote.

Ships VIA UPS truck freight.

Components

• DART Little M Splayed Cap 9″ x 4.155″ Fully Race Prepped Block
• AERC 4″ 4340 Internally Balanced Crankshaft
• AERC 6″ 4340 H-Beam 3-D Connecting Rods with ARP 8740 Bolts
• WISECO 14:1 Pro Series 2618 Pistons
• TOTAL SEAL Plasma Moly 1/16″ x 1/16″ x 3/16″ File Fit Low Tension Rings
• ACL/CLEVITE “H” Series Main and Rod Engine Bearings
• Complete Assembly Internally Balanced on a CWT 5000 Engine Balancer
• DART Coated Low Friction Cam Bearings
• DART PRO 1 227cc Fully CNC Ported Aluminum Cylinder Heads
• MANLEY 2.08″ x 1.6″ Stainless Steel Valves
• ASSOCIATED .710″ Lift 1.550″ Roller Valve Springs
• COMP CAMS 10° Locks and 10° Retainers
• FEL PRO Racing #1010 Head Gaskets
• MANLEY 5/16″ .080 Wall Push Rods
• HOLLEY 1050CFM Dominator and #6 AN Fuel Fittings
• 1″ B&B Dowel Pinned Carb Spacer, Studs and Gaskets
• DART Stage 1 Match Ported Intake Manifold
• PRW Stainless Steel Heavy Duty 7/16″ x 1.5″ Ratio Roller Rocker Arms
• PRW One Piece Heavy Duty Stud Girdle with 7/16″ Adjusters
• COMP CAMS/LUNATI Custom Grind Roller Camshaft
• LUNTI/MOREL/PBM +.300″ Extreme Duty Vertical Bar Roller Lifters
• ROLL MASTER Billet True Roller Timing Set with Torrington Bearing
• SOLID POLISHED ALUMINUM Timing Cover w/Billet TDC Verified Pointer
• MOROSO 7qt. Competition Stroker Oil Pan & Pickup
• MELLING M55 High Volume Oil Pump
• PRW Laser Etched TDC Verified 6¼” SFI Balancer
• ARP 190,000psi Head Bolts
• MSD #8489 Billet Slip Collar Distributor
• MSD 8.5mm Racing Wires
• AUTOLITE AR3934 Racing Spark Plugs
• AWESOME ENGINES Polished Aluminum CNC Engraved Logo Valve Covers

Upgrades

 Print This Ad

The Pro Bracket series of race engines have been designed for the real bracket racer with a reasonable budget. For these prices, our customers receive a package that has been assembled using the industry’s finest products in combination with our quality workmanship.

Our foundation is built upon Dart’s Big M series of racing engine blocks. These engines are constructed to provide throttle response, power, round for round consistency, durability, and performance for almost any type of performance racing. Check out the new standards found in Awesome Engines!

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold! Give us a call, or contact us by email for a custom quote.

Ships VIA UPS truck freight.

Components

• Dart #31273444 Big M Splayed Cap 9.8″ x 4.5″ Race Prepped Block
• AERC 4¼” 4340 Internally Balanced 69lb Crankshaft
• AERC 6.535″ 4340 H-Beam 3-D Connecting Rods with ARP 8740 Bolts
• Wiseco 14:1 Pro Series NOS Pistons (no je/srp or protrue)
• Total Seal Plasma Moly 1/16 x1/16 x3/16 File to Fit Low Tension Rings
• ACL or Clevite “H” Series Racing Engine Bearings
• Dart Special Coated Low Friction Cam Bearings
• Direct Motion 360cc Fully CNC Ported Aluminum Cylinder Heads
• Manley or Precision 2.3″ x 1.88″ Stainless Steel Valves
• Associated .810″ Lift 1.625″ Roller Valve Springs
• Comp Cams 10° Retainers & 10° Valve Locks
• Fel #1017 Perma Torque Head Gaskets
• Manley or Comp Cams 3/8″ x .080″ Wall Push Rods
• Holley 1050cfm Dyno Tested & Tuned Dominator Carburetor
• Weiand New Clean Cast Team G Stage 1Match Ported Intake Manifold
• PRW Stainless Steel 1.7 Ratio Heavy Duty Roller Rocker Arms
• Jomar 1 Piece Pro Series Lightweight Stud Girdle
• Comp Cams or Lunati Custom Grind Solid Roller Camshaft
• Lunati-Morel-PBM +.300″ Extreme Duty Vertical Bar Roller Lifters
• Roll Master Billet True Roller Timing Set with Torrington Bearing
• GM Chrome Style Timing Cover with TDC Verified Pointer
• Moroso #20405 7qt. Competition Oil Pan & Pickup
• Melling M77 High Volume Oil Pump
• PRW Lazer Etched 6¼” SFI Balancer TDC Verified
• ARP or Manley 190,000 psi Head Bolts
• MSD #8489 Billet Slip Collar Distributor
• Autolite AR3934 Racing Spark Plugs
• Awesome Engines Polished Aluminum CNC Engraved Valve Covers

Upgrades

 Print This Ad