The Pro Magnum series drag racing engines have always been two steps ahead of most other race engines on the market today. All top shelf American made parts and workmanship, along with the best machine work available, has produced a series of powerful, consistent, and durable race engines.

The rock solid short blocks have Dart Iron Eagle raised BBC cam and wide splayed billet cap blocks, Callies Magnum series crankshafts, Oliver steel billet rods, and Wiseco .043″ Pro series 2618 pistons.

Components

• Dart Iron Eagle BBC 50mm Raised Cam Splayed Billet Cap 9.325″ Block
• Callies Magnum 4340 4¼” Crankshaft
• Oliver Steel Billet 6.2″ Connecting Rods
• Wiseco 15:1 Pro Series 2618 Gas Ported Pistons
• Wiseco Tool Steel Wrist Pin Package
• Total Seal .043″ Low Tension Ring Package
• Clevite “H” Series Main and Rod Race Bearings
• Dart Special Coated 50mm Low Friction Cam Bearings
• Complete Assembly Internally Balanced on CWT 5000 Multi-Bal
• Dart 15º Fully CNC Ported Aluminum Cylinder Heads
• Manley 2.20″ x 1.625″ Severe Duty Stainless Steel Valves
• Manley Nex Tek 1.64″ Roller Valve Springs
• Manley Titanium 10º Retainers and Comp Cams 10º Locks
• Fel Pro NOS Multi Layer Head Gaskets
• Trend .135″ Wall 3/8″ Push Rods
• Quick Fuel Technologies 1050cfm Dominator Carburetor
• Edelbrock Super Victor Stage III Ported Intake Manifold
• T&D Pro Series Shaft Rockers with Spring Oilers
• Comp Cams-Lunati Custom 7/4 Swap BBC Journal Solid Roller Cam
• Morel +.300″ Extreme Duty Solid Roller Lifters
• Cloyes Billet Timing Set with Torrington Bearing
• Solid Polished Aluminum Timing Cover with TDC Billet Pointer
• Moroso Pro Eliminator Aluminum Oil Pan with Kick Out
• Moroso #22171 Billet Oil Pump
• ATI 6¼” All Aluminum 3½ lb. Super Damper
• ARP 12 Point Fastener Cylinder Head Stud Kit
• MSD #8558 Billet Distributor with Slip Collar
• MSD, Moroso Crank Trigger Kit
• MSD Under the Header Spark Plug Wires
• Autolite Racing Spark Plugs
• Awesome Engines Polished Aluminum CNC Engraved Valve Covers
• Pure Power Stainless Steel Oil Filter (Lifetime reusable never needs replacement)
• Dyno Tested and Tuned, Balance and Blue Print Sheets Supplied

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold by any means when apples for apples are used. Ships VIA UPS truck freight.

(all engines are dyno tested with Moroso Vacuum Pump, Belt Drive, DamBest Billet 1050 cfm carb, S/Victor Fully Ported Intake, 10w10 oil, pure power filter, VPQ13 Race Fuel, HP corrected to Sea Level)

Upgrades

 Print This Ad

The Pro Magnum series drag racing engines have always been two steps ahead of most other race engines on the market today. All top shelf American made parts and workmanship, along with the best machine work available, has produced a series of powerful, consistent, and durable race engines.

The rock solid short blocks have Dart race series splayed billet cap blocks, Callies Magnum series crankshafts, Oliver steel billet rods, and Wiseco .043″ pro series 2618 pistons.

Components

• Dart #31122212 Iron Eagle BB Journal Raised Cam Billet Splayed Cap 9″ Block
• Callies Magnum 4340 4.0″ Crankshaft
• Oliver Steel Billet 6.0″ Connecting Rods
• Wiseco 15:1 Pro Series 2618 Gas Ported Pistons
• Wiseco Tool Steel Wrist Pin Package
• Total Seal .043″ Low Tension Ring Package
• Clevite “H” Series Main and Rod Bearings
• Dart Coated Cam Bearings
• Complete Assembly Internally Balanced With CWT5000 Multi-Bal
• Dart 15º Fully CNC Ported Aluminum Cylinder Heads
• Manley 2.20″ x 1.625″ Severe Duty Stainless Steel Valves
• Manley NexTek 1.64″ Roller Valve Springs
• Manley Titanium 10º Retainers with Comp Cams 10º Locks
• Fel Pro NOS Multi Layer Head Gaskets
• Trend .135″ Wall 3/8″ Pushrods
• Quick Fuel Technologies 1050cfm Dominator Carburetor
• Edelbrock Super Victor Stage III Ported Intake Manifold
• B&B 1″ Pinned Special Spacer, Studs and Gaskets
• Jesel or T&D Shaft Rockers with Spring Oilers (T&D Option Only)
• Comp Cams or Lunati Custom 7/4 Swap Solid Roller Cam with Ever Wear Gear
• Lunati-Morel +.300″ Extreme Duty Roller Lifters
• Cloyes Billet Timing Set with Torrintgon Bearing
• Solid Polished Aluminum Timing Cover with TDC Verified Billet Pointer
• Moroso Pro Eliminator Aluminum Oil Pan with Kick Out
• Moroso #22171 Billet Oil Pump
• ATI 6¼” All Aluminum 3½ lb.  Super Damper
• ARP ½” 12 Point Head Stud kit
• MSD #8558 Billet Distributor
• MSD / Moroso Spark Plug Wires
• MSD / Moroso Crank Trigger Kit
• Autolite AR3933 Racing Spark Plugs
• AERC Polished CNC’d Painted Logo Aluminum Valve Covers
• Pure Power Stainless Steel Oil Filter (Lifetime Reusable)
• Dyno Tested and Tuned, Balance and Blue Print Sheet Supplied

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold by any means. Ships VIA UPS truck freight.

(all engines are dyno tested with Moroso Vacuum Pump, Belt Drive, DamBest Billet 1050 cfm carb, S/Victor Fully Ported Intake, 10w10 oil, pure power filter, VPQ13 Race Fuel, HP corrected to Sea Level)

Upgrades

 Print This Ad

The Pro Magnum series drag racing engines have always been two steps ahead of most other race engines on the market today. All top shelf American made parts and workmanship, along with the best machine work available, has produced a series of powerful, consistent, and durable race engines.

The rock solid short blocks have Dart race series splayed billet cap blocks, Callies Magnum series crankshafts, Oliver steel billet rods, and Wiseco .043″ pro series 2618 pistons.

Components

• Dart Big M Splayed Billet Steel Cap 11.100″ Block (pro series)
• Callies Magnum II / Lunati Pro 4340 Internally Balanced 5.3″ Crankshaft
• Oliver Steel Billet 7¼” Connecting Rods
• Wiseco 17:1 (alky only) 15:1 (race gas) Pro Series 2618 Gas Ported Pistons
• Total Seal .043″ Low Tension Ring Package
• Clevite “H” Series Race Bearings
• Coated Cam Bearings
• BMF 405cc Full CNC Ported Aluminum Cylinder Heads
• Manley 2.35″ x 1.88″ Severe Duty Stainless Steel Valves
• Manley NexTek 1.677″ Triple Roller Valve Springs
• Manley Titanium 10º Retainers & Comp Cams 10º Locks
• Fel Pro MLS Head Gaskets
• Trend .165″ Wall Push Rods
• Ron’s Twin Terminator Complete Alky Fuel System
• CFE Sheet Metal Intake
• Jesel / T&D Shaft Rockers w/Spring Oilers
• Comp Cams / Lunati Custom 7/4 Swap Solid Roller Camshaft
• Lunati / Morel +.300″ Extreme Duty Vertical Bar Roller Lifters
• Cloyes Billet Timing Set w/Torrington Bearing
• Special Raised Cam Solid Aluminum Timing Cover & Billet TDC Pointer
• Moroso Pro Eliminator Aluminum Oil Pan w/Kick Out
• Moroso #22167 Billet Oil Pump
• ATI 6¼” All Aluminum Super Damper
• ARP ½” Head 12 Point, Head Stud Kit
• MSD 8558 Pro Billet Distributor
• MSD / Moroso Spark Plug Wires
• MSD / Moroso / Holley Crank Trigger Kit
• Autolite Racing Spark Plugs
• AERC Polished Cnc’d Painted Logo Aluminum Valve Covers
• Pure Power Stainless Steel Oil Filter

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold by any means. Ships VIA UPS truck freight.

Upgrades

 Print This Ad

The Pro Magnum series drag racing engines have always been two steps ahead of most other race engines on the market today. All top shelf American made parts and workmanship, along with the best machine work available, has produced a series of powerful, consistent, and durable race engines.

This rock solid short block has the Dart race series splayed billet cap blocks, Callies Magnum II U.S.A. series crankshaft, Oliver steel billet rods, and Wiseco .043″ pro series 2618 pistons just to name a few high end components.
Components

• Dart Big M Splayed Billet Steel Cap 10.2″ Block (pro series)
• Callies 4¾” New Magnum II Series 69lb 4340 Int/Bal Crankshaft
• Oliver Steel Billet 6.7″ Connecting Rods
• Wiseco 15:1 Pro Series 2618 Gas Ported Pistons
• Total Seal .043″ Low Tension Ring Package
• Clevite “H” Series Race Bearings
• Pro Stock Coated Cam Bearings
• BMF 405cc Full CNC Ported Aluminum Cylinder Heads
• Manley / Precision 2.35″ x 1.88″ Severe Duty Stainless Steel Valves
• Manley NexTek 1.677″ Triple Roller Valve Springs
• Manley Titanium 10º Retainers & Comp Cams 10º Locks
• Fel Pro MLS NOS Head Gaskets
• Trend .135″ Wall Push Rods
• Quick Fuel Technologies 1250cfm Dominator Carburetor
• Dart Full CNC Special Large Port Stage III Intake Manifold
• T&D Shaft Rocker System w/Spring Oilers
• Lunati Custom 7/4 Swap Solid Roller Cam
• Lunati / Morel +.300″ Extreme Duty Solid Roller Lifters
• Billet Timing Set w/Torrington Bearing
• Solid Polished Aluminum Timing Cover w/Billet TDC Verified Pointer
• Moroso Pro Eliminator Aluminum Oil Pan w/Kick Out
• Moroso #22167 Billet Oil Pump
• ATI 6 ¼” All Aluminum Super Damper
• ARP Head Studs
• MSD 8558 Large Cap Adjustable Collar Billet Distributor
• Moroso Ultra 40 / MSD Under the Header Spark Plug Wires
• MSD / Moroso / Holley Crank Trigger Kit
• Autolite Racing Spark Plugs
• AERC Polished Aluminum Valve Covers
• Pure Power Stainless Steel Lifetime Oil Filter

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold by any means. Ships VIA UPS truck freight.

Upgrades

 Print This Ad

The Pro Magnum series drag racing engines have always been two steps ahead of most other race engines on the market today. All top shelf American made parts and workmanship, along with the best machine work available, has produced a series of powerful, consistent, and durable race engines.

The rock solid shortblocks have Dart race series splayed billet cap blocks, Callies 4340 U.S.A. crankshafts, Oliver steel billet rods, and Wiseco .043″ pro series 2618 pistons just to name a few high end components.

Components

• Dart Big M Splayed Billet Steel Cap 10.2″ Block (pro series)
• Callies U.S.A. 4½” 4340 w-Perma-Tough Heat Treating
• Oliver CGP1 Steel Billet 6.8″ Connecting Rods
• Wiseco 15:1 Pro Series 2618 Gas Ported Pistons
• Total Seal .043″ Low Tension Ring Package
• Clevite “H” Series Race Bearings
• Pro Stock Coated Cam Bearings
• BMF 385cc / Dart 380cc Full CNC Ported Aluminum Cylinder Heads
• Manley / Precision 2.30″ x 1.88″ Severe Duty Stainless Steel Valves
• Manley NexTek 1.677″ Triple Roller Valve Springs
• Manley Titanium 10º Retainers & Comp Cams 10º Locks
• Fel Pro MLS NOS Head Gaskets
• Trend .135″ Wall Push Rods
• Quick Fuel Technologies 1150cfm Dominator Carburetor
• Profiler Sniper Stage III Ported ntake Manifold
• T&D Shaft Rocker System w/Spring Oilers
• Lunati Custom 7/4 Swap Solid Roller Cam
• Lunati / Morel +.300″ Solid Roller Lifters
• Billet Timing Set w/Torrington Bearing
• Solid Polished Aluminum Timing Cover w/Billet TDC Verified Pointer
• Moroso Pro Eliminator Aluminum Oil Pan w/Kick Out
• Moroso #22167 Billet Oil Pump
• ATI 6 ¼” All Aluminum Super Damper
• ARP Head Studs
• MSD 8558 Large Cap Adjustable Collar Billet Distributor
• Moroso Ultra 40 / MSD Under the Header Spark Plug Wires
• MSD / Moroso / Holley Crank Trigger Kit
• Autolite Racing Spark Plugs
• AERC Polished Aluminum Valve Covers
• Pure Power Stainless Steel Lifetime Oil Filter

Our engines come complete and race ready. Any and all upgrades are available upon request. We will not be undersold by any means. Ships VIA UPS truck freight.

Upgrades

 Print This Ad