DR 20° 598CI 1100Hp BBC Bullet Race Engine

DR 20° 598ci 1100Hp BBC Bullet Race Engine

$21,999.00

9.8″ Deck | 4.6″ Bore | 4.5″ Stroke | 6.535″ Rods | 860 lbs @ 6200 rpm / 1100 hp @ 7600 rpm

Components

  • Dart Big M or Merlin III 4 Axis CNC Race Prepped Block; your choice
  • ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Manley 4340 Internally Balanced Steel Crank
  • Manley Steel H-Beam Rods with ARP 2000 Bolts
  • King “H” Race Series Main and Rod Bearings
  • Wiseco DR20° 15.44:1 Quick 8 Pro Series Gas Ported Coated Skirt Pistons
  • .180″ Thick Wall Tool Steel 1400 Hp Wrist Pins
  • Total Seal Stainless Steel, TNT or Hell Fire Low Tension Rings
  • Comp Cams .900″ 7/4 Swap Steel Billet Roller Camshaft
  • Cloyes Billet True Roller Timing Set with Torrington Bearing
  • Solid Polished Aluminum Front Timing Cover
  • Comp Cams HIPPO (hi-pressure pin oiling) Roller Lifters
  • ATI Super Damper with Billet TDC Verified Pointer
  • Dart 20° 440cc Fully CNC Ported Heads
  • Dart 2.4 x 1.8″ Stainless Steel Valves
  • Manley or PAC Racing Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Multi-Layered Head Gaskets
  • Manley or Trend Taper-Wall 1/2″ x .135″” Wall Severe Duty Push Rods
  • Jesel or T&D Shaft Rocker System with Spring Oil Installed
  • AwesomeEngines® CNC Engraved Powder Coated Logo Valve Covers
  • Moroso #22185 Oil Pump Kit and Proper Pick Up Tig Welded
  • Moroso Eliminator #21049 Kick Out Oil Pan
  • Sniper CNC Match Ported Large Port Intake
  • Special Jomar Heat Sink CNC Ported Spacer
  • QFT 1400 cfm FX Race Series Carburetor
  • MSD 84697 Big Cap Distributor and Crank Trigger Installed
  • Free 48 State Freight

Available Upgrades

Dart or World Steel Billet Cap Upgrade
+ $  450.00
Brodix or Dart Aluminum Block Raised Cam 55mm .904″ Hippo Lifter
+ $4495.00
Callies Magnum Internally Balanced Crank (no heavy metal required)
+ $ 1295.00
Callies Ultra or Oliver Steel I Beam Rods (best in the business)
+ $1195.00
Erson “HIPPO” (high pressure pin oiling) Severe Duty Roller Lifters with Solid Bushed Roller Wheels
+ $ 695.00
Isky EZ MAX 37296LO180 Bushed Roller Lifters (best in the business)
+ $ 895.00
Trend or Precision .220″ Tool Steel Severe Duty Wrist Pins (may require heavy metal @ $75 per 1.0 x 1.0″ slug)
+ $  195.00
Comp Cams or Jesel Standard Height Belt Drive Installed
+ $  895.00
Titanium Intake Valves
+ $  795.00
Moroso Complete Vacuum Pump System Completely Installed
+ $  995.00
Moroso #22163 HV Billet Oil Pump
+ $  275.00
Moroso Aluminum #20385 Pro Eliminator Kick Out Style Oil Pan
+ $  295.00
Ultra SFI 168 Tooth Flex-plate Internally Balanced in House w/ARP Bolts
+ $  125.00
Power Master 4.0Hp High Torque Gear Reduction Made in the USA New Design Starter
+ $  195.00
New “BIG DAWG” Steel Stator Natural or NOS Style Converter
+ $1495.00
New PRO 2000Hp Power Glide with Roller Bearing Extension and All Top of the Line Internals
+ $3995.00
Rons Terminator System Installed, Dyno Tested and Tuned Ready to Run
+ $1995.00

Dyno Tested and Tuned • Using C14 Fuel • Vacuum Pump • Corrected to Sea Level

21999/21999

Comments are closed.