Ford 369ci 700Hp Bracket Race Engine

 

Ford 369ci 700 Hp Bracket Race Engine

$14,995.00

Cost for Competitors Engines are over  $15,850.00+ with near exact parts using their option lists; Our 210cc head has much faster air speed and we build this with bushed Comp Cams HD roller lifters, ATI Super Dampener, MLS head gaskets, .120″ wall push rods, stud girdle for RPM that the engine requires for even the smaller 210cc heads. Even if you wanted a 220cc head that moves rpm well over 8400 rpm, the exact same engine would cost $15,390.00 ? Do the Math!

8.200″ Deck | 4.155″ Bore | 3.400″ Stroke | 5.400″ Rods | 700Hp @ 7800 rpm

Components

  • Dart #31364275 SHP 4 Bolt Main Splayed Cap Race Block
  • ARP Head Stud Kit Plate Honed with Block
  • Dart Coated Cam Bearings,  Brass Plugs and Block Small Parts Kit
  • K1 011DA1340 Internally Balanced 4340 Steel Crank
  • K1 011A125540 H Beam Rods with ARP 2000 Rod Bolts
  • Clevite or King Racing Main and Rod Bearings
  • JE or Wiseco 13.6:1 Forged 2618 Pistons with .157″ Wall Pins
  • JE or Wiseco 043-043-3.0 mm Plasma Moly File to Fit Rings
  • Competition Cams Steel Billet.750″ Lift Solid Roller Cam
  • Competition Cams HD Bushed Hippo Solid Roller Lifters
  • Cloyes True Roller Timing Set
  • Timing Cover with ATI TDC Verified Pointer
  • ATI Super Damper Specific Honed to Crank Shaft
  • Bracket Pro 210cc 100% CNC Ported Heads Flow 325/239 @.700″
  • 2.080-1.600″ Stainless Steel Valves
  • PAC Racing .750″ Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Manley .120″ Wall Chrome Moly Push Rods
  • Competition Cams Pro Magnum 1.6 Rockers, AFR Stud Girdle
  • AwesomeEngines® CNC Engraved Custom Valve Covers
  • Melling Oil Pump and Moroso Pick-up (front or rear sump)
  • Moroso Front or Rear Sump 7 qt. Oil Pan
  • Dart #44411000 or Edelbrock Victor Jr Match Ported Intake
  • Holley or QFT 850cfm Carburetor and Jomar Spacer
  • MSD Black Distributor, 8.5 Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Dart #31354275 Sportsman Steel Billet Splayed Cap 100% CNC Race Block
+ $ 582.81
JE GFX Hell Fire, Total Seal Stainless Steel or TNT Severe Duty Ring Set
+ $ 195.00
JE or Wiseco Tool Steel .200″ Wall Wrist Pins and Heavy Metal Included for Balancing
+ $ 195.00
AFR Renegade 220cc with 2.10/1.57″ 8.0 mm Valves, Raised Exhaust 3.75″ 100% CNC Ported Cylinder Heads will Work but RPM GOES UP
+ $ 395.00
T&D Shaft Rockers
+ $1075.00
Jesel Pro Series Shaft Rockers
+ $1195.00
Moroso 3 Vain Complete Vacuum Kit with Mandrel, Pulleys, Hoses. AN Fittings, Brackets, Pump Mounted Relief Valve Dyno Tested and Tuned
+ $1050.00
MSD Crank Trigger Installed
+ $ 325.00
PowerMaster 9503 XS 4.40:1 Ratio 200lbs of Torque Starter
+ $  225.00
EZ Complete Turn Key Engine, Crank Trigger, Jesel Belt Drive, Shaft Rockers, Moroso Air Pump System, TCI SFI Flexplate and PowerMaster Starter
+ $2995.00
EZ Complete NOS NX 300Hp Plate Kit, JE Hell Fire File to Fit for NOS Rings, Tool Steel Wrist Pins, NOS Soft Chamber Heads, MLS Head Gaskets,
+ $1295.00

Dyno Tested & Tuned with 110 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar