Ford 444ci 700 Hp Bad Dawg Street Crate Engine

Ford 444ci 700Hp Bad Dawg Street Heat Crate Engine

$13,995.00

9.500″ Deck | 4.155″ Bore | 4.100″ Stroke | 6.200 Rods | 700Hp @ 6800 rpm

Components

  • DART SHP Splayed Cap 100% CNC 4 Axis Machined Race Block
  • 12 Point Head Stud Kit Plate Honed w/Your Block
  • Stainless Steel or Brass Life-Time Freeze Plug Kit Installed
  • K1 4340 Internally Balanced Steel Crank
  • K1 Steel Billet FH6200ALLb8A 4340 H-Beam Rods w/ARP2000
  • King “HP” Series Main and Rod Bearings
  • Mahle 10.75:1 Forged 2618 Pistons (8-13:1 ava)
  • 1.5/1.5/3mm File to Fit Moly Light Weight Ring Set
  • AwesomeEngines® Comp Cams Custom .660″ Lift Solid Roller
  • Cloyes Billet True Roller Timing Set
  • New TCF302s Aluminum Timing Cover and TDC Pointer
  • Comp Cams HIPPO Solid Roller Link Bar Lifters
  • PowerBond Internally Balanced SFI Harmonic Dampener

  • AFR 1456, Brodix Track 1 or Dart Fully CNC Ported Heads
  • AFR 2.1/1.57 Brodix-Dart 2.080″/1.600″ Stainless Steel Valves
  • PSI Polished Double Roller Valve Springs w/Tool Steel or Tit Retainers
  • Fel Pro #1046 Steel Wire Pre-Flattened Head Gaskets
  • Manley .120″ Wall Chrome Moly Push Rods
  • Comp Cams Pro Magnum Roller Rockers
  • AwesomeEngines® CNC Engraved Polished Aluminum Valve Covers
  • AwesomeEngines® Melling M83 Oil Pump w/Proper Pick Up
  • AwesomeEngines®  Moroso Front or Rear 7 Qt Stock Chassis Oil Pan
  • Edelbrock Super Victor Match Ported Intake Manifold
  • HOLLEY  or QFT 1050 CFM 4150 Carburetor and Jomar Spacer
  • MSD Pro Billet Distributor, 10.5mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Available Upgrades

Dart Iron Eagle Small Block Ford Cast Iron Block Fully 4 Axis CNC Race Prepped to 4.185 Bore and 4.250 Radial Clearance
+ $ 775.00
Callies Dragon Slayer EFZ71T-DS 4.100 4340 Internally Balanced Engine (heavy metal may be required)
+ $ 995.00
New Motown SBF Race Match Ported Intake Manifold w/4500 Top and 1050 QFT Carburetor
+ $ 795.00
ATI Super Damper Installed (specify 3/4 bolt, late or early)
+ $ 125.00
AwesomeEngines® Jomar Pro Series Stud Girdle System Installed
+ $ 95.00
JESEL or T&D Shaft Mounted Rocker System
+ $1095.00

Dyno Tested & Tuned Using Exxon 93° Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the UPS Terminal Closest to Your Zip Code for Pickup in the 48 States

Comments are closed.