LS 427ci 725 Hp Pro Street Engine

LS 427ci 725 Hp Pro Street Engine

Dart SHP LS Next CNC Race Prepped Block as well as the AFR 12° Mongoose CNC Fully Ported Heads for the Real Pro Street Race Engine just makes a Killer all Around Package for the Pro Street Applications. These Dyno Tested and Tuned Ready to Drop in New Generation SBC Engines have just Taken over Everywhere

$17,975.00

9.240″ Deck Height | 4.125″ Bore | 4.000″ Stroke | 6.125″ Rods | 725Hp @ 6600 rpm

Components

  • Dart SHP LS Next CNC Race Prepped Block
  • ARP Head Stud Kit Plate Honed with Block
  • Callies 4340 Internally Balanced Steel Crank
  • Callies H-Beam Rods with ARP 2000 Bolts
  • King Race Series Main and Rod Bearings
  • JE Wiseco K463X125 2618 Forged Pistons 11:1
  • JE or Wiseco Thick Wall 800Hp Wrist Pins Included
  • JE or Wiseco GFX 1.2 1.2 3.0 mm Lightweight Ring Package
  • Comp Cams or Isky .660″ Lift Hydraulic Roller Cam
  • Cloyes Complete HP Timing Component Kit
  • GM Front and Rear Cover Kit
  • Isky/Johnson HIPPO Hydraulic Best in the Business Roller Lifters
  • ATI Super Damper (best in the business)
  • AFR 260cc Mongoose LS 12° 100% CNC Ported Heads
  • AFR 8mm Bead Lock 2.165″ 1.600″ Stainless Steel Valves
  • Pac Racing Hydraulic Roller Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Manley or Trend 3/8 x .135″ Wall Push Rods
  • GM 1.8 LS Rockers with Trunion Bushing Kit
  • AwesomeEngines® Holley CNC Engraved Logo Valve Covers
  • Moroso #22124 Oil Pump Kit and Pick Up
  • Moroso 21047 Drag Race 7 Quart Capacity Oil Pan
  • Edelbrock or GM LS7 25534394 Match Ported Intake
  • FiTech or HalTech up to 800 Hp EFI Kit
  • MSD Coils, Wires and Ignition Kit With Cam and Crank Sensors
  • AwesomeEngines® Free 48 State Freight

Options

Jesel or T&D Shaft Rocker System
+ $1095.00
Delete EFI Kit and Use 950 cfm Holley or QFT Carburetor and MSD Ignition Ready to Run Kit
+ NO CHARGE
MSD LS Controller (6014) Programmable Electronic Ignition Box (For 24T/58T Reluctor Wheel). Available in Black or Red For Carburetor Set up Only
+ $ 395.00
TCI SFI Flexplate and PowerMaster Starter Kit
+ $ 395.00
March Front Pulley and Bracket Kit Polished or Powder Coated (from)
+ $1275.00

Dyno Tested and Tuned with 93° Pump Gas Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Item Shipped to a Commercial Address Or the UPS Terminal Closest to Your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar