MFR Small Block Chevy 195cc Aluminum Cylinder Heads

MFR Small Block Chevy 195cc Aluminum Cylinder Heads


MFR Small Block Chevy 195cc/64cc Aluminum Cylinder Heads have 2.02 intake and 1.6″ exhaust 11/32 valves. They are in stock and ready to ship. Dart or Manley Valves, Comp Cams, Manley or Pac Springs, 10° locks, retainers, 7/16 x 3/8″ rocker studs and 5/16 guide plates are standard. These are not chinese procomp/speedmaster heads. I do not retail poor quality machine work or inferior parts for profit especially when it cost me more to fix all the mistake and take a chance it will still leak water sometimes.



  • Fully CNC Machined, 195cc/64cc Aluminum Cylinder Heads
  • AwesomeEngines® in house Rolled Radius 45° Valve Job
  • Intake Ports with a 2.02″ Valve Flow 250+-cfm @ .700″ Lift
  • Exhaust Ports with a 1.6″ Valve Flow 180+-cfm @ .700″ Lift
  • Bronze Alloy Fully Machined and Honed Valve Guides
  • Utilizes Existing SBC Intake Manifolds
  • Uses Standard SBC Header Pattern
  • Uses Standard SBC Rocker Arms
  • All Stock Hardware Bolts Directly to These Heads
  • Rigid ½” Deck Thickness
  • Accessory Bolt Holes In Stock Location
  • Uses Standard Head Bolts or Head Studs
  • All Intake and Exhaust Ports have been Hand Blended
  • Dart or Manley 2.02″ Stainless Steel Intake Valves
  • Dart or Manley 1.60″ Stainless Steel Exhaust Valves
  • All Valve Seats are Hand Lapped to Insure Perfect Seal
  • Comp Cams 1.5 Flat Tappet or Hydraulic Roller Springs Good for 600″
  • Comp Cams or Manley 10° Degree Chrome Moly Retainers
  • Comp Cams or Manley 10° Machined Super Locks
  • U.S. PC Valve Stem Seals Installed (we never leave these off)
  • Comp Cams or Manley Hardened Spring Seats or Washers
  • Comp Cams Dart or Manley 7/16 x 3/8 Studs and 5/16″ Guide Plates
  • Hot Washed Blown Dry, Lubed, Final Spring Set Per Needs
  • Professionally Assembled and Ready to Install

Available Upgrades

Manley 2..02 1.6 Severe Duty Intake and Exhaust Valves
+ $ 295.00
Enconel Exhaust Valves
+ $ 295.00
Pac or Manley Solid Roller .700″ Valve Springs, Titanium Retainers; Package (requires stud girdle or shaft rockers)
+ $ 395.00
Jomar Complete Stud Girdle Kit
+ $ 195.00
T&D any Ratio of 1.5 or 1.6 Shaft Rocker System
+ $1195.00
Jesel 1.5 or 1.6 Ratio Pro Series Shaft Rocker System
+ $1395.00
Fel Pro MLS Head Gaskets (up to 4.180 bore size and .041″ thickness, other sizes available)
+ $ 185.00
Manley Specific Fit Head Bolt Kit
+ $ 85.00
ARP Specific Fit Head Stud Kit with 12 Point Fasteners and Washers
+ $ 175.00

All Completed Heads Come with Specific Build Sheet, all Part numbers, Spring Rates and Installed Height Settings

Comments are closed.