Mopar 611ci 1000 Hp Pro Charger Crate Engine

611ciRB Wedge Mopar 1000Hp+ Pro Charger Crate Engine

We also build Hemi Engines mild enough so your mom could drive it


Bore 4.560″ | Stroke 4.675″ | Rod 7.100″ | Torque 900lbs+ @ 4000 rpm – Hp 1000+ @ 6000 rpm


  • Mopar Mega Race Block Fully CNC Prepped w/4 Axis Block Machine
  • Block Plate Honed w/Head Stud Kit used in Assembly
  • Stainless Steel Freeze Plugs For Lifetime Service
  • AR-K1 4340 Internally Balanced Steel Crank
  • AR-4340 Steel H-Beam Fully Floated Bushed Pin Oiling Rods w/ARP Bolts
  • Clevite or King “HP” Series Main and Rod Bearings
  • Wiseco 8:1 Forged Blower Pistons
  • .180 Wall Steel Wrist Pins w/Spiral Locks
  • Total Seal Stainless Steel File to Perfect End Gapped Rings
  • Comp Cams .700″ Lift Solid Roller Blower Cam
  • Comp Cams HIPPO Severe Duty Roller Lifters
  • Cloyes 3 Piece Timing Set w/Indexable Cam Timing
  • Chrome Timing Cover and TDC Pointer
  • AwesomeEngines® ATI SFI Dual Key Way Super Damper
  • Edelbrock Victor Fully CNC Ported Heads w/Maxx Flow Port
  • Manley 2.250/1.880 Stainless Steel Severe Duty Series Valves
  • Manley 1.640″ Nex Tek Springs and Titanium Retainers
  • Fel Pro #1039 Pre Flattened Steel Wire Head Gaskets
  • Trend or Manley 3/8 x.120″ Wall Push Rods
  • Harland Sharp Complete Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Powder Coated V/C
  • Melling M63HV High Volume High Pressure Oil Pump Kit
  • AwesomeEngines® Moroso Oil Pan w/Proper Pick Up Tube
  • BDS, Blower Shop or Indy Powder Coated Intake Manifold
  • Pro Charger F1 C Package Pump Gas Super Charger Kit
  • AwesomeEngines® QFT 1050cfm Blow Threw Pump Gas Carb
  • MSD Distributor, 10.5mm Plug Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

BMP Aluminum Block Fully CNC Race Prepped on a Real 4 Axis Block Machining Center
+ $3995.00
Indy 572 Fully CNC Ported Cylinder Heads
+ $1995.00
Callies Dragon Slayer Crank Installed
+ $  995.00
Callies Magnum 4¾” Internally Balanced Crankshaft w/ 622CI
+ $1495.00
K1 H-Beam Steel Billet or Manley Rods w/ARP2000 Bolts
+ $  195.00
Oliver I Beam Best in the Business Steel Rods w/Killer Bolts
+ $  995.00
.200″ Wall Tool Steel Wrist Pins for up to 1800HP
+ $  195.00
Total Seal Stainless Steel Extreme Duty Piston Rings
+ $  195.00
Wiseco (7:1) Lower Compression Pistons For More Boost and Power w/Pump Gas w/043/’043/3.0mm
+ $  195.00
Crower Stainless Steel or T&D Pro Series Shaft Rocker System
+ $1595.00
MSD Crank Trigger System
+ $  325.00
Moroso Complete Vacuum Pump System Installed
+ $  995.00
Comp Cams Solid Roller Cam and HIPPO Roller Lifter Package
+ $  295.00
Pro Charger F1R Complete Blow Threw System Installed 1000+ Hp Easily w/Mild Tune Up, Better Pins, Stainless Steel Rings, MLS Head Gaskets
+ $1975.00
F2R and F3R Available Upon Request
Complete Fast EFI Pro System Installed, Dyno Tested and Tuned w/Lap Top and 3 Tune ups
+ $3975.00

Dyno T&T w/93° Exxon Pump Gas • HP corrected to Sea Level

Comments are closed.