MVR 200cc Small Block Ford Top End Performance Kit

MVR 200cc Small Block Ford Top End Performance Kit

$1378.03

Completely Brand New MVR 200cc Small Block Ford Top End Performance Kit gives you everything needed for the entire swap of your old steel cylinder heads; included is everything needed to complete the job in one special kit that will allow you to swap this all out in less than a day with normal hand tools. Average up to 50+ Hp Per Application over stock heads

 

Components

  • F2002360 MVR Strike Force 200cc Aluminum Heads
  • 60CC Combustion Chambers
  • 501S Stamped Steel Retainers 7°
  • 2675 I.D. Type Spring Cups
  • 603 Guideplate 5/16 Flat
  • 2106 2.020″ +.100 Intake Valves
  • 2004 1.600″ +.100 Exhaust Valves
  • 260-1125 Full Gasket Set
  • 734C Logo Chrome Valve Covers
  • 154-2001 ARP Intake Bolt Kit
  • E210036 Erson Performance Cam
  • 3200 Hydraulic Valve Springs
  • 205 11/32 Locks
  • 5301132 Viton Seals
  • 5180 3/8 Rocker Studs
  • 1621-16 6.876″ 5/16″ Pushrods
  • 154-3605 ARP Head Bolt Kit
  • 7121 Edelbrock Intake Manifold
  • 702 Timing Set
  • HA900 Set of Lifters
  • 106-16 1.6 Aluminum Roller Rocker Arm Kit
  • Completely Assembled Matched Top End Package

 

Available Upgrades

Manley 2..02 1.6 Severe Duty Intake and Exhaust Valves
+ $ 295.00
Enconel Exhaust Valves
+ $ 295.00
Erson Solid Roller .700″ Lift Valve Springs, Titanium Retainer Package
+ $ 395.00
Jomar Stud Girdle Kit for Solid Roller Package Upgrade
+ $ 195.00
Comp Cams Magnum Series Chrome Moly Lifetime Roller Rockers
+ $325.00
Jesel or T&D 1.6 Ratio Sportsman Series Shaft Rocker System
+ $1295.00
Fel Pro MLS Head Gaskets (up to 4.180 bore size and .041″ thickness, other sizes available)
+ $ 185.00
QFT Brawler 650-750 CFM Double Pumper Carburetor with Electric Choke for Easy Winter Start
+ $495.00
MSD Ready to Run Distributor and Coil Kit for Plug and Run Ignition System
+ $ 495.00

All Completed Heads Come with Specific Build Sheet, Part #s, Spring Rate Installed and Open Pressures

Comments are closed.