MVR 320cc Big Block Chevy Top End Performance Kit

MVR 320cc Big Block Chevy Top End Performance Kit

$1783.20

Completely Brand New MVR 320cc Big Block Chevy Top End Performance Kit gives you everything needed for the entire swap of your old steel cylinder heads; included is everything needed to complete the job in one special kit that will allow you to swap this all out in less than a day with normal hand tools. Average up to 70+ Hp Per Application over stock heads

 

Components

  • C3200115 MVR Strike Force 320cc Aluminum Heads
  • 1067 BBC Head Gaskets
  • 502S Stamped Steel Retainers 7°
  • 2679 I.D. Type Spring Cups
  • 602 Guideplate 5/16 Flat
  • 1216  2.300″ +.250 Intake Valves
  • 1204  1.880″ +.100 Exhaust Valves
  • 260-1009 Full Gasket Set
  • 745C Logo Chrome Valve Covers
  • 134.3601 ARP Intake Bolt Kit
  • 007-3 Cam Lock Kit
  • E120018 Erson Performance Cam
  • 3050 Hydraulic Valve Springs
  • 205 11/32 Locks
  • 5301132 Viton Seals
  • 5183 7/16″ Rocker Studs
  • 1964-8  8.500 x 3/8 1938-8 9.500 3/8 x .080″ Wall Pushrods
  • 5008 Head Bolt Kit
  • P1275 Intake Gaskets
  • 53031 Intake Manifold
  • 707 Timing Set
  • HA817 Set of Lifters
  • 105-16 1.7 Aluminum Roller Rocker Arm Kit
  • Completely Assembled Matched Top End Package

 

Available Upgrades

Manley 2.300 x 1.880″  Severe Duty Intake and Exhaust Valves
+ $ 395.00
Enconel Exhaust Valves
+ $ 345.00
Erson Solid Roller .700″ Lift Valve Springs, Titanium Retainer Package
+ $ 395.00
Jomar Stud Girdle Kit for Solid Roller Package Upgrade
+ $ 245.00
Comp Cams Magnum Series Chrome Moly Lifetime Roller Rockers
+ $345.00
Jesel or T&D 1.7 Ratio Sportsman Series Shaft Rocker System
+ $1595.00
Fel Pro MLS Head Gaskets (up to 4.180 bore size and .041″ thickness, other sizes available)
+ $ 195.00
QFT Brawler 850CFM Double Pumper Carburetor with Electric Choke for Easy Winter Start
+ $495.00
MSD Ready to Run Distributor and Coil Kit for Plug and Run Ignition System
+ $ 495.00

All Completed Heads Come with Specific Build Sheet, Part #s, Spring Rate Installed and Open Pressures

Comments are closed.