MVR Small Block Ford 185cc Aluminum Cylinder Heads

MVR Small Block Ford 185cc Aluminum Cylinder Heads


MVR SB Ford heads have 185cc Intake runners with 2.02/1.60″ valves and 60cc combustion chambers that are best with 351ci and smaller engines. They are in stock and ready to ship. Stainless Steel Valves, Comp Cams or Erson, 10° locks, retainers, 3/8 studs and 5/16 guide plates are included. I have used these heads and found to be of the utmost quality castings and machining available. These are not ProComp or Speedmaster Castings.



  • Fully Machined MVR 185cc/60cc Aluminum Light Weight Heads
  • AwesomeEngines® uses a Rolled Radius 45° Valve Job
  • Clean Casting Exhaust and Intake Ports with a 2.02/1.6″ Valve Job
  • Bronze Alloy Fully Machined Valve Guides
  • Utilizes Existing SBF Intake Manifolds
  • Uses Standard SBF Header Pattern
  • Uses Standard SBF Rocker Arms
  • All Stock Hardware Bolts Directly to These Heads
  • Rigid Extra Thick Deck Surfaces
  • Accessory Bolt Holes In Stock Location
  • Stainless Steel 2.020″/1.600″ Valves
  • All Valve Seats Hand Lapped to Insure Perfect Seal
  • Comp Cams 1.437 Dual Flat Tappet or Hydraulic Roller Springs 600″ Lift Cam
  • Comp Cams or Manley 10° Degree Tool Steel Light Weight Retainers
  • Comp Cams or Manley Valve Locks
  • U.S. PC Valve Stem Seals Installed (we never leave these off)
  • Comp Cams or Manley Hardened Spring Seats or Washers
  • Comp Cams Dart or Manley 3/8 Studs and 5/16 Guide Plates
  • Hot Washed Blown Dry, Lubed, Final Spring Pressure Set for Application
  • Professionally Assembled and Ready to Install

Available Upgrades

Manley 2..02 1.6 Severe Duty Intake and Exhaust Valves
+ $ 295.00
Enconel Exhaust Valves
+ $ 295.00
Pac or Manley  Solid Roller .700″ Valve Springs, Titanium Retainers; Package
+ $ 325.00
Jomar Stud Girdle Kit
+ $ 195.00
T&D 1.6 Ratio Pro Series Shaft Rocker System
+ $1295.00
Jesel 1.6 Ratio Pro Series Shaft Rocker System
+ $1495.00
Fel Pro MLS Head Gaskets (up to 4.180 bore size and .041″ thickness, other sizes available)
+ $ 185.00
Manley Specific Fit Head Bolt Kit
+ $ 85.00
ARP Specific Fit Head Stud Kit with 12 Point Fasteners and Washers
+ $ 175.00

All Completed Heads Come with Specific Build Sheet, all Part numbers, Spring Rates and Installed Height Settings

Comments are closed.