Pontiac 461ci Street Heat Crate Engine

Pontiac 461ci Street Heat Crate Engine

100% CNC Race Prepared 400 Block, Finished Bore of  4.155″, Ext-Balanced 4.250 Stroker Rotator with KB Piston, I Beam Rods and all component in the Pontiac heads for Unleaded Fuel to be used, Dyno Tested and Tuned Ready to Install

$7995.00

http://www.youtube.com/watch?v=-z8-gGh8wkY

10.230″ Deck | 4.155″ Bore | 4.250″ Stroke | 6.800″ Rods | 575 lb 4400 rpm-550 Hp @ 5000 rpm

Components

  • Pontiac 100% CNC Race Prepped 400 Block to 4.155 Bore
  • Pioneer Brass Freeze Plug Kit and Block Small Parts Kit
  • Eagle #52401 4.250″ Nodular Ext/Bal Crank Shaft
  • 4340 6.800″ I Beam Steel Connecting Rods
  • Mahle/Clevite or King Main and Rod Bearings
  • KB Hypereutectic Stroker Flat Top Pistons
  • Mahle Plasma Moly File to Fit Rings
  • Competition Cams #51-234 Magnum Hydraulic Flat Tappet Cam
  • Competition Cams #852-16 Magnum Hydraulic Flat Tappet Lifters
  • Competition Cams #2112 Double Roller Timing Kit
  • Aluminum Timing Cover and Kit
  • Internally Balanced Damper
  • Pontiac Heads with all Brand-New Components for Unleaded Fuel
  • 2.110″ Intake, 1.770″ Exhaust Stainless Steel Valves
  • 1.437 Springs and 10° Steel Retainers
  • Hi-Performance Fel Pro Engine Gaskets, Viton Rubber 2 Piece Rear Seal
  • Chrome Moly 5/16 Push Rods
  • Competition Cams #1451-16 Roller Tip Rocker Arms
  • Melling M54DS HP Oil Pump and Proper Pickup Tube
  • Pontiac Short or Tall Valve Covers with Baffles
  • Edelbrock Performer Intake Manifold
  • Holley Avenger or QFT Brawler 850 cfm Carburetor Dyno Tuned
  • HEI Distributor with 8.5 mm Wires and NGK Plugs
  • Dyno Tested and Tuned to Perfection, Boxed and Ready to Ship

OPTIONS

MR1 Steel Billet Main Cap Race Block, 100% CNC Race Prepped Best Block in the Business, a 4.500″ Stroke and 4.400″ Bore will Produce a 535ci Engine
+ $3500.00
4340400425068002200 Internally Balanced Steel Crank
+ $  900.00
4340 H Beam 6.800″ Connecting Rods with ARP 2000 Rod bolts
+ $  700.00
Mahle Forged Light Weight Pistons, Pins and Lock Kit
+ $ 900.00
Pro Street Kit 4340 Crank, 4340 H Beam Rods with ARP2000 Bolts, Mahle Stroker Forge Pistons, Pins, Rings and Lock Kit
+ $3000.00
Pro Street Competition Cams #51-309-4 Hydraulic Roller Cam, Evolution Lifters, Roller Tip Rockers, Springs, Retainers, Push Rod Kit
+ $1400.00
SFI Steel Harmonic Internal Damper
+ $ 250.00
Jesel or T&D Shaft Rocker System
+ $1400.00
Street Heat Kauffman 85cc or Edelbrock Performer RPM D Port 87cc Combustion Chamber Aluminum Cylinder Heads
+ $2500.00
Pro Street Kauffman High Port Oval Spread Port Cylinder Heads and North Wind 4150 Intake, 950cfm ProForm Double Pumper with 750 Hp
+ $4000.00
Edelbrock Torker II Intake Manifold
+ $ 250.00
EFI Holley Sniper Electronic Fuel Injection Kit Dyno Tested and Tuned
+ $1000.00
MSD Ready to Run Billet Distributor, Coil, Wires Kit Dyno Tested & Tuned with Engine
+ $ 750.00

Dyno Tested & Tuned with 93° Exxon • Vacuum Pump • HP Corrected To Sea Level

Free Freight of $300 Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar