Pontiac 472ci Pro Street Crate Engine
400-3.000″ Main 100% CNC Race Prepped Block, Bored and Honed to 4.155-85″ if needed, Internally Balanced 4.350″ 4340 Stroker Steel Crank, 6.800 H Beam Rods with 7/16 Rod Bolts, Carrillo Forged Flat Top Pistons. Pontiac Race Prepped Steel Heads with all New Moving Components, Valves, Springs, Retainers, Locks, Seals, Valve Guides and Exhaust Seats if Required; Assembled, Dyno Tested and Tuned.
$9,995.00
http://www.youtube.com/watch?v=-z8-gGh8wkY
10.222″ Deck | 4.155-85″ Bore | 4.350″ Stroke | 6.800″ Rods | 650lb 4400 – 610Hp @5200
Components
- Pontiac 400-M 100% 4 Axis CNC Race Prepped to 4.155-85″ Bore Block
- ARP Head Bolt and Main Stud Kit
- Brass Freeze Plug Complete Block Kit
- Eagle 4.350″ Internally Balanced 4340 Steel Crank
- Eagle 6.800″ H Beam 4340 Steel Rods with ARP 7/16 Rod Bolts
- Clevite or King Race Series Main and Rod Bearings
- Carrillo 10.5:1 Forged Flat Top Pistons
- Total Seal File to Fit Plasma Moly Rings
- Competition Cams Magnum Hydraulic Roller Cam
- Erson or Morel Hydraulic Roller Lifters
- Competition Cams Double Roller Timing Chain and Gear Kit
- New Aluminum Front Timing Cover Kit
- New Internally Balanced Damper
- Kauffman 310cc 85cc Aluminum D Port Exhaust Heads
- Ferrea Stainless Steel Valves
- PAC Racing 1.437 Springs, 10° Tool Steel Retainers
- Fel Pro Engine Gaskets and Viton 2 Piece Rear Main Seal
- Manley or Trend .120″ Thick Wall Chrome Moly Push Rods
- Competition Cams #1451-16 Roller Tip Rocker Arms
- Melling M54DS HP Oil Pump and Proper Pickup Tube
- Moroso #20500 Stroker 7qt. Race Oil Pan with Baffling
- Short or Tall Chrome Valve Covers
- Edelbrock Torker II Intake Manifold
- Holley or Edelbrock 850 cfm Carburetor Dyno Tuned
- HEI Distributor, MSD 8.5 mm Wires, NGK Plugs (see options)
- Actual Shipping Charges to Your Zip Code for Pick Up
OPTIONS
AwesomeEngines® 100% 4 Axis CNC Race Prepped MR1 Iron Race Block with Steel Billet Main Caps
+ $2800.00
AwesomeEngines® 100% 4 Axis CNC Race Prepped MR1A Aluminum Light Weight Race Block
+ $3975.00
579CI 4.185″ .060″ Bore
+ $ 200.00
Competition Cams or Harland Sharp Roller Rockers
+ $ 300.00
Jesel or T&D Shaft Rocker System Installed
+ $1100.00
Kauffman or Edelbrock Performer D Port 340 cfm 100% CNC Ported Aluminum Heads
+ $1595.00
Kauffman High Port Oval Port Exhaust CNC Ported Aluminum Heads
+ $2195.00
Kauffman North Wind Match Ported Intake Manifold and Crossover
+ $ 400.00
ATI SFI Steel Super Damper Specific Honed to Crankshaft Snout
+ $ 300.00
Holley or QFT 950 CFM Carburetor with Jomar CNC Ported Heat Sink Spacer and Hardware
+ $ 600.00
MSD Pro Billet Ready to Run #8528 Distributor, MSD Coil, MSD 8.5 mm Wires Complete Kit Dyno Tested with Engine
+ $ 600.00