Pontiac 495 ci 650 Hp Pro Street Crate Engine

Pontiac 495 ci 650 Hp Pro Street Crate Engine

100% CNC Race Prepped Dead On Pontiac Block with either .030″.040″ or .060″ Finished Bore Internally Balanced with a 4.500″ Stroker Rotator with Forged Pistons and H Beam Rods, with all New Components Listed Below for a Killer Pro Street Pontiac Crate Engine

$12,975.00

10.220″ Deck | 4.155″ Bore | 4.350″ Stroke | 6.800″ Rods | 625 lb 4400 rpm – 650 Hp @ 5500 rpm

Components

  • Pontiac 100% Race Prepped Block 4.155″, 4.165″, or 4.185″ Bore
  • ARP Head Stud Kit Plate Honed with Block
  • Brass Freeze Plug Kit
  • Eagle or Scat 4.500″ Internally Balanced 4340 Steel Crank
  • Eagle or Scat 6.800″ H-Beam 4340 Steel Rods
  • King Race Series Main and Rod Bearings
  • Carrillo, JE, Mahle or Wiseco 10.5:1 Dish Forged Pistons
  • Total Seal Plasma Moly Hi-Performance Rings
  • Competition Cams Magnum Hydraulic or Solid Roller Cam
  • New Aluminum Timing Cover and Complete Install Kit
  • Competition Cams Hydraulic or Solid Roller Lifters
  • Rollmaster Billet 9 Keyway Torrington Double Roller Timing Set
  • ATI New Internally Balanced Damper
  • Edelbrock RPM 204 cc / 87 cc Aluminum Street Ported Heads
  • 2.110″ Intake, 1.660″ Exhaust Stainless Steel Valves
  • 1.437 Hyd Roller Springs with 10° Steel Retainers
  • Fel Pro Performance Engine Gasket Kit, Butler Viton Rear Seal
  • Manley Chrome Moly Thick Wall Push Rods
  • Comp Cams Gold Series Roller Rocker Arms
  • AwesomeEngines® CNC Engraved Tall Aluminum Valve Covers
  • Melling M54DS Oil Pump and Proper Pickup Tube
  • Moroso Stroker 7qt. Capacity Race Oil Pan with Baffling
  • Edelbrock RPM or Victor Intake Manifold
  • Holley or QFT 850 cfm Dyno Tested and Tuned Carburetor
  • MSD Billet Distributor, 8.5mm Wires, NGK Plugs
  • Actual Shipping Charges to Your Zip Code for Pick Up

OPTIONS

Callies, Crower or Bryant 4330V Steel Billet Best in the Business 4340 Crank Shaft Internally Balanced with Heavy Metal Needed, Best Used with Either MR1 Block
+ $3775.00
MR1 Cast Block with Special Head Stud Kit Plate Honed 100% CNC Race Prepped Block
+ $2775.00
MR1A Aluminum Block with Special Head Stud Kit Plate Honed Specifically Light Weight 100% CNC Race Prepped Block
+ $3975.00
578 ci is the Largest Safest 4.400″ Bore, 4.750″ Internally Balanced 4340 Crank for Either MR1 Block
+ $1575.00
Callies Ultra Series I Beam Rods with L19 Rod Bolts
+ $1075.00
Isky Red Zone EZ Roll Bushed Hippo Roller Lifters
+ $975.00
GFX, Total Seal SS, TNT or Hell Fire .043/.043/3.0 mm Severe Duty Rings
+ $ 175.00
JE Tool Steel .200″ Wrist Pins and Heavy Metal for Balancing
+ $ 375.00
Jesel or T&D Shaft Rocker System
+ $1375.00
Fully CNC Ported Edelbrock Aluminum Cylinder Heads (Kauffman cylinder heads available, please call)
+ $1275.00
Port Match Edelbrock Intake Manifold to Cylinder Heads
+ $ 375.00

Dyno Tested and Tuned with 93° Exxon • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies for Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar