Pro Filer Sniper 224XL 430cc Racing Aluminum Heads

Pro Filer Sniper 224XL 430cc Racing Aluminum Heads

$5695.00

Pro Filer Sniper 224-XL 430cc runner is as big as it gets for 24° cylinder heads. Fully CNC ported with a 2.400″ intake and 1.850″ exhaust stainless Steel valves are standard in our assemblies. Our heads use Manley Stainless Steel Valves with Manley or Pac Springs, 10° locks and titanium retainers. These are as good as it gets for 24° cylinder heads

 

Components

  • Fully CNC Ported 430cc Aluminum Heads
  • Pro Filer uses a Rolled Radius 50° Valve Job
  • Intake Ports with a 2.4″ Intake Vale Flow 514+cfm @ 1.0″ Lift
  • Exhaust Ports with a 1.85″ Exhaust Valve Flow 325+cfm @ .800″ Lift
  • Steel Valve Seats for Stainless Steel Valves
  • Bronze Alloy Fully Machined Valve Guides
  • Utilizes Existing BBC Intake Manifolds
  • Uses Standard BBC Header Pattern
  • Uses 12 Flat Bar Jesel or T&D Shaft Rocker System
  • All Stock Hardware Bolts Directly to the Cylinder Heads
  • Increased Deck Thickness to Support Power Adders
  • Uses 5 Extra Long Head Bolts Over the Exhaust
  • Fully CNC Ported Combustion Chambers
  • Full CNC Ported Intake and Exhaust Runners
  • Manley Stainless Steel Intake and Exhaust Valves
  • All Valve Seats Hand Lapped to Insure Perfect Seal
  • Pac or Manley Triple Roller Valve Springs Good for .900″ Lift
  • Pac or Manley 10° Titanium or Tool Steel Degree Retainers
  • Comp Cams 611-16 10° Machined Super Locks
  • U.S. PC Valve Stem Seals Installed (we never leave these off)
  • Manley or Pac Hardened Spring Seats
  • Must use Shaft Rockers Only Per Applications
  • Hot Washed Blown Dry, Lubed and Final Spring Set to Specifications
  • Professionally Assembled, Packaged and Sealed

Available Upgrades

116cc Combustion Chambers
+ $ 100.00
Titanium 2.400″ Intake Valves and Copper Alloy Valve Seats
+ $ 825.00
Titanium 1.850 Exhaust Valves and Copper Ally Valve Seats
+ $ 825.00
ARP Series 12 Point Head Stud Kit
+ $  295.00
T&D any Ratio Pro Series Shaft Rocker System
+ $1695.00
Jesel any Ratio Pro Series Shaft Rocker System
+ $1795.00
Fel Pro MLS Head Gaskets (up to 4.640 bore size and .043″ thickness, other sizes available)
+ $ 190.00
JE or Wiseco Pro Series Pistons and .043/.043/3.0mm Stainless Steel, TNT or Hell Fire Ring Set
+ $1095.00
Solid Head Castings for Severe Duty Power Adder Combinations
+ $ 350.00
ProFiler Sniper 1×4 CNC Match Ported Intake Manifold $595; ProFiler Sniper 2×4 CNC Match Ported Tunnel Ram Intake Manifold
+ $ 995.00
CFE Sheet Metal Intake Manifold with a Single Top or 2×4 4500 Series Top, This is the best intake manifold to make 1200+Hp
+ $2750.00

All Completed Heads Come with Specific Build Sheet, all Part numbers, Spring Rates and Installed Height Settings

Comments are closed.