SBC 434ci 625 Hp Pro Street Crate Engine

SBC 434ci 625 HP Pro Street Crate Engine

A true Pro Street Race Engine is built with a 4 Axis cnc race prepped Dart block to dead on specifications on our 2014 Centroid  block cnc machining center for the start. This block cnc machining center can bore to within .0002″ of  blue print bore centers as well as bank to bank correct angles being dead on 45°+-. Perfect ring seal and dead on compression for every cylinder helps produce the most power possible for your engine. Assembled to perfection, dyno tested and tuned.


9.005″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 590lb@ 4800 / 625Hp @ 6800 rpm


  • DART LITTLE M Splayed Cap CNC 4 Axis Race Prepped Block
  • DART Coated Cam Bearings and Freeze Plug Kit Installed
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 Steel Billet or Manley H-Beam Rods with ARP 2000 Rod Bolts
  • KING Race Series Main and Rod Bearings
  • JE  or WISECO 10.75:1 Pro Series 2618 Alloy Forged Pistons
  • JE or WISECO .157″ Wall Steel Wrist Pins
  • TOTAL SEAL File to Fit Rings
  • COMPETITION CAMS 7/4 Swap .630″ Solid Roller Pro Street Cam
  • COMPETITION CAMS “HIPPO” USA Solid Roller Lifters
  • CLOYES Billet True Roller Set with Torrington Bearing
  • AwesomeEngines® Aluminum Timing Cover w/Billet TDC
  • SFI Steel Internally Balanced Damper
  • AFR Eliminator 227cc CNC Ported Heads
  • AFR 2..100-1.600″ Stainless Steel Valves
  • PAC RACING 1.550″ .700″ Lift Roller Spring, Titanium Retainers
  • FEL PRO Racing Head Gaskets
  • MANLEY .120″ Wall Chrome Moly Severe Duty Push Rods
  • HARLAND SHARP .050″ Offset Roller Rockers
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • MOROSO Oil Pump Kit with Pick Up, Shaft and Stud
  • MOROSO Oil Pan with Windage Tray and Dip Stick Kit
  • EDELBROCK Victor Match Ported Intake Manifold
  • HOLLEY or QFT 850 cfm Carburetor Dyno Tested and Tuned
  • JOMAR CNC Ported 3D Intake Spacer and Heat Sync
  • MSD Billet 85551 Distributor, 8.5mm Wires w/NGK Spark Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

ATI Made in the U.S.A. Super Damper Installed for the Best Protection Available
+ $ 275.00
COMPETITION CAMS Hot Hydraulic Pro Street 7/4 Swap Roller Cam Kits with Cast Gear
+ $ 95.00
 COMPETITION CAMS DRST New Hydraulic Roller Racing Lifters for more RPM
+ $ 475.00
Jomar Pro Series Stud Girdle for Max Protection Against Deflection
+ $ 195.00
JESEL or T&D Pro Series Shaft Rockers
+ $ 995..00
Edelbrock Under the Carb Fuel Pressure Regulator Kit w/# 6 An Lines
+ $ 145.00
Complete EFI Fast Fuel Injection System Installed, Dyno Tested & Tuned for a True Late Model Set-Up
+ $1975.00
All Aluminum Version w/BRODIX, DART or MERLIN Aluminum Block and Special Head Stud Kit
+ $3995.00
Awesome Engines CNC Engraved Logo Your Color Painted and Powder Coated Covers w/ Billet Oil Fill
+ $ 200.00

Dyno Tested and Tuned with 91° Fuel • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply If Requested.

Comments are closed.