SBC 434ci 650 Hp Pro Street Crate Engine

SBC 434ci 650 HP Pro Street Crate Engine

The Pro Street Race Engine is built with a Dart Little M Race Block machined with our 4 Axis cnc Block machining Center. Near dead on specifications within .0002″, blue print bore centers, perfect 45° bank angles, perfect ring seal and dead on compression for every cylinder helps produce the most possible power for the engine. Assembled to perfection, dyno tested and tuned ready.

$12,975.00

9.005″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 590lb@ 4800 / 625Hp @ 6800 rpm

Components

  • DART LITTLE M Splayed Cap CNC 4 Axis Race Prepped Block
  • DART Coated Cam Bearings and Brass Freeze Plug Kit Installed
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 Steel Billet or Manley H-Beam Rods with ARP 2000 Rod Bolts
  • KING Race Series Main and Rod Bearings
  • JE  or WISECO 10.5:1 Pro Series 2618 Alloy Forged Pistons
  • JE or WISECO .157″ Wall Steel Wrist Pins
  • TOTAL SEAL File to Fit Rings
  • COMPETITION CAMS 7/4 Swap .630″ Solid Roller Pro Street Cam
  • COMPETITION CAMS “HIPPO” USA Solid Roller Lifters
  • CLOYES Billet True Roller Set with Torrington Bearing
  • AwesomeEngines® Aluminum Timing Cover and Billet TDC Pointer
  • SS SFI Steel Internally Balanced Damper
  • AFR Eliminator 227cc Competition CNC Ported Heads
  • AFR 2..100-1.600″ Stainless Steel Valves
  • PAC RACING 1.550″ .700″ Lift Roller Spring, Titanium Retainers
  • FEL PRO Racing Head Gaskets
  • MANLEY .120″ Wall Chrome Moly Severe Duty Push Rods
  • HARLAND SHARP .050″ Offset Roller Rockers
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • MOROSO Oil Pump Kit with Pick Up, Shaft and Stud
  • MOROSO Oil Pan with Windage Tray and Dip Stick Kit
  • AFR #4811  CNC Match Ported Intake Manifold
  • HOLLEY or QFT 950 cfm Carburetor Dyno Tested and Tuned
  • JOMAR CNC Ported 3D Intake Spacer and Heat Sync
  • MSD Billet 85551 Distributor, 8.5mm Wires, NGK Spark Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

ATI Made in the U.S.A. Super Damper Specific Honed to Fit the Crank Snout
+ $ 275.00
COMPETITION CAMS Hot Hydraulic Pro Street 7/4 Swap Roller Cam Kits
+ $ 95.00
 COMPETITION CAMS DRST (drag-race-shot-travel) Hydraulic Roller Racing Lifters
+ $ 475.00
Jomar Pro Series Stud Girdle for Max Protection Against Deflection
+ $ 195.00
JESEL or T&D Pro Series Shaft Rockers
+ $ 995..00
Edelbrock Under the Carb Fuel Pressure Regulator Kit w/# 6 An Lines
+ $ 150.00
Complete EFI Fast Fuel Injection System Installed, Dyno Tested and Tuned
+ $1975.00
All Aluminum Version with a BRODIX or DART Aluminum Block and Special Head Stud Kit
+ $3995.00
Awesome Engines CNC Engraved Logo Your Color Painted and Powder Coated Covers with Billet Oil Fill and PCV Grommet
+ $ 250.00

Dyno Tested and Tuned with 91° Fuel • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States.

Comments are closed.