434ci 710 Hp SBC Ultra Bad Dawg Pro Street Engine

434ci 710 HP SBC Ultra Bad Dawg Pro Street Engine

434ci 700 Hp SBC Ultra Bad Dawg Pro Street Engine is built with the Dart Little M2 Raised Cam Steel Billet Splayed Cap Block, 11:1 Compression with AFR 245cc Totally CNC Ported Heads, 93° Pump Gas with a Pro Street Solid Roller 55mm Cam and 710 Hp NA: Nitrous 1000+ Hp Power Adder with no Options needed to do it. Why would you settle for less and pay more for options we already include standard in the Bad Dawg SBC Pro Street Race Engine? Nearest competitors prices are over $21,805.00 without all the options we include.

$21,975.00

9.000″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 595 lb@ 5300 / 710 Hp @ 7000 rpm

Components Included

  • Dart Little M2 .400″ RC Steel Billet Cap 100% CNC Machined Block
  • ARP Head Stud Kit Plate Honed with the Block
  • Dart Block Kit with Coated 55 mm Cam Bearings, Brass Freeze Plugs
  • B40040006000 Steel Billet Internally Balanced Crank Shaft
  • K1 Steel Billet or Manley 6.000″ H Beam 4340 Rods, ARP 2000 Rod Bolts
  • King or Mahle Race Series Main and Rod Bearings
  • JE or Wiseco Nitrous 11:1 Compression Forged 2618 Shelf Pistons
  • JE Hell Fire or Total Seal TNT .043 .043 3.0 mm File To Fit Ring Set
  • Comp Cams 55mm 7/4 Swap Steel Billet Solid Pro Street Roller Cam
  • Comp Cams HD Severe Duty Bushed Solid Roller Lifters
  • Cloyes Billet Roller Timing Set with Torrington Bearing
  • Cloyes Two Piece Aluminum Timing Cover, TDC Billet Pointer
  • ATI Super Damper Specific Honed to Fit Crank
  • AFR 1138-TI 245cc Competition CNC Ported Aluminum NPP Heads
  • AFR 2.125-1.600″ Stainless Steel 8.0 mm Valves
  • Pac Racing .710″ Lift Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Severe Duty Head Gaskets
  • Trend Taper Wall 7/16 x .165″ Wall Push Rods
  • Jesel Pro Series 1.6 Shaft Rocker System
  • AwesomeEngines® CNC Engraved Sheet Metal Valve Covers
  • Moroso Complete Oil Pump Kit
  • Moroso Stroker 7qt. Pro Street Oil Pan
  • AFR CNC Match Ported Intake Manifold
  • Holley or QFT 1050-4150 cfm Black Diamond Carb and Spacer Kit
  • MSD Pro Billet Distributor, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Brodix Hipped Aluminum Fully CNC Race Prepped Block with Special ARP Head Stud Kit
+ $3475.00
Dart Hipped Aluminum Fully CNC Race Prepped Block with Special ARP Head Stud Kit
+ $3175.00
Callies XL Internally Balanced Crankshaft with NO DRILL Balance Includes Heavy Metal
+ $1475.00
Callies Timken 4330V Steel Ultra I Beam Connecting Rods with L19 Bolts
+ $1075.00
Jesel Raised Cam Billet Belt Drive System Installed
+ $ 1275.00
Isky Red Zone EZ-ROLL Bushed Roller Bearing Lifters
+ $ 675.00
Moroso 22171 Billet Aluminum Oil Pump Kit
+ $ 275.00
Fast or Holley 1200 Hp Fuel Injection System Dyno Tested and Tuned
+ $1075.00
Power Master Ultra HP Starter
+ $ 250.00

Dyno Tested and Tuned with 93° Exxon • Vacuum Pump Kit Installed • HP Corrected To Sea Level

Free Freight Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar