SBC 434ci 715 Hp Bracket Race Engine

SBC 434ci 715 Hp Bracket Race Engine

$11,975.00

9.000″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 715Hp @ 7000 rpm

Components

  • Dart SHP Splayed Cap Block CNC 4 Axis Race Prepped
  • Stainless Steel Life-Time Freeze Plug Kit
  • 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 Steel Billet or Manley H-Beam Steel Rods with ARP 2000 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE Wiseco 15:1 Lil Quick 16 Gas Ported Coated Skirt Pistons
  • JE Wiseco Tool Steel Wrist Pins
  • Total Seal Plasma Moly .043 Ring Package
  • Competition Cams .700″ Lift 7/4 Swap Steel Billet Solid Roller Cam
  • Competition Cams HIPPO Solid Roller Lifters
  • Cloyes Torrington Bearing Roller Timing Set
  • Aluminum Timing Cover and Billet TDC
  • SFI Approved Damper Internally Balanced
  • AFR Eliminator, Brodix STS or Dart Pro 1 227cc 100% CNC Ported Aluminum Heads
  • 2.080/1.600″ AFR, Brodix or Dart SS Valves
  • PAC RACING Roller Springs and 10° Tool Steel Retainers
  • Fel Pro #1010 Pre-Flattened Copper Wire Head Gaskets
  • Manley .120″ Wall Chrome Moly Push Rods
  • Comp Cams Pro Magnum Chrome Moly Roller Rockers, Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Oil Pump Kit
  • Moroso 7qt. Oil Pan with Windage Tray
  • AFR, Brodix, Dart 100% CNC Match Ported Intake Manifold
  • Jomar Phenolic Spacer, Studs and Gaskets
  • Holley or QFT 1050cfm Carb  Dyno T&T (add $995)
  • MSD Billet 84697 Distributor, 8.5mm Wires, NGK Spark Plugs (add $495)
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Little M-Sportsman Series 100% $ Axis Blue-Printed Race Prepped Block
+ $ 475.00
Callies Magnum Internally Balanced Crankshaft
+ $1275.00
All New Crower #E95128X4 Enduro Crankshaft; Excellent for Power Adder or Nitrous Engines
+ $1475.00
Oliver I Beam Steel Rods with L19 Rod Bolts
+ $ 975.00
Callies Ultra I Beam Steel Rods with L19 Rod Bolts
+ $1175.00
JE Wiseco .170″ Wall Tool Steel Wrist Pins
+ $ 175.00
Comp Cams NBO Bushed HIPPO Roller Lifters
+ $ 475.00
ISKY RED ZONE Bushed HIPPO Roller Lifters
+ $ 775.00
Total Seal TNT or Hell Fire Rings
+ $ 175.00
Jesel or T&D 1.6/1.5 Shaft Rockers Installed
+ $1197.00
Fel Pro MLS Head Gaskets
+ $ 95.00
Jesel Belt Drive System
+ $ 895.00
MSD Crank Trigger Dyno Tested
+ $ 275.00
Moroso Complete Vacuum Pump System Installed
+ $1075.00
ATI Super Damper Specific Honed to the Crank Snout
+ $ 250.00
Edelbrock Super Victor CNC Match Ported Intake Manifold
+ $ 250.00
Ultra SFI 168 Tooth Flex-Plate Internally Balanced in House and ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Heavy Duty Starter
+ $ 245.00

Dyno Tested and Tuned Using 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Comments are closed.