SBC 434ci 745 Hp Bracket Race Engine

SBC 434ci 745 Hp Bracket Race Engine

$12,475.00

9.000″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 745Hp @ 7000 rpm

Components

  • Dart Little M Splayed Cap Block CNC 4 Axis Race Prepped
  • Stainless Steel or Brass Freeze Plug Kit
  • Pro Series 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 Steel Billet or Manley H-Beam Rods with ARP 2000 Bolts
  • King  Race Series Main and Rod Bearings
  • JE Wiseco “Lil” Quick 16 15:1 Pistons
  • Total Seal .043 Top Ring Low Tension Oil Ring Package
  • Comp Cams 7/4 Swap .740″ Steel Billet Roller Cam
  • Comp Cams HIPPO (hi-pressure pin oiling) Roller Lifters
  • Cloyes Billet Timing Set with Torrington Bearing
  • Aluminum Timing Cover and Billet TDC
  • ATI Super Damper Internally Balanced
  • Brodix Track 1 STS 233cc Fully CNC Ported Heads 326/233@.700
  • Brodix 2.125/1.600″ Stainless Steel Valves
  • PAC RACING 1.550″ Roller Springs, Titanium Retainers
  • Fel Pro HP Racing Head Gaskets
  • Manley .120″ Wall Chrome Moly Severe Duty Push Rods
  • Competition Cams Pro Magnum 1.6/1.5  Roller Rockers, Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Oil Pump and Pickup Complete Kit
  • Moroso 7qt. Oil Pan with Windage Tray
  • Brodix Stage 1 CNC Match Ported Intake Manifold
  • Holley or QFT 1050cfm Carb, Spacer Dyno Tested and Tuned (add $995)
  • MSD Billet 84697 Distributor, 8.5mm Wires, NGK Plugs (add $595)
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Little M Steel Billet Main Cap 100% 4 Axis CNC Race Prepped Block
+ $475.00
Callies Magnum Internally Balanced 4340 Crankshaft
+ $1275.00
Crower #E95128X4 Enduro Internally Balanced 4340 Crankshaft
+ $1475.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 975.00
Callies Ultra I Beam Rods with L19 Rod Bolts
+ $1175.00
Comp Cams Bushed HIPPO Roller Lifters
+ $ 675.00
ISKY RED ZONE Bushed HIPPO Roller Lifters
+ $ 875.00
Total Seal TNT or Hell Fire Rings
+ $ 175.00
Jesel or T&D Split Ratio 1.6/1.5 Shaft Rockers Installed
+ $1175.00
Fel Pro MLS Head Gaskets
+ $ 95.00
Jesel Belt Drive System Installed
+ $ 875.00
MSD Crank Trigger Set Up Installed, Dyno Tested and Tuned
+ $ 275.00
Moroso Complete New Vacuum Pump System Installed
+ $1175.00
Edelbrock Super Victor CNC Match Ported Intake Manifold
+ $250.00
Ultra SFI 168 Tooth Flex-Plate Internally Balanced in House and ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Heavy Duty Starter
+ $245.00

Dyno Tested and Tuned Using 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Comments are closed.