434ci 780 Hp SBC Pro Bracket Race Engine

434ci 780Hp SBC Pro Bracket Race Engine

$16,975.00 Turn Key

AFR 245cc CNC Ported Heads • ARP 2000 Bolts, Comp Cams Hippo Lifters • Wiseco Lil Quick 16 Pistons with 043-043-3.0 mm Rings • JE HNS Rings • 7/4 Swap Cam • 7/16 x .165″ Wall Trend Push Rods • Jesel Shaft Rockers • 1050 Carburetor • Spacer • MSD Complete Ignition Kit • Turn Key • Needs Nothing Extra • Best Priced Complete Ready to Go Race Engine

9.000″ Deck |4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 780Hp @ 7400 rpm

Components

  • Dart Little M Splayed Cap 100% CNC Race Prepped Block
  • Dart Coated Cam Bearings and Block Small Parts Kit
  • Steel Billet 4340400400060002100 Internally Balanced Crank
  • K1 Steel Billet  6.000″ H Beam Rods with 7/16 ARP 2000 Rod Bolts
  • King HP Race Series Main and Rod Bearings
  • Wiseco Quick 16  Gas Ported Coated Skirt 14:1 Forged Pistons
  • JE HNS Power Adder Light Weight Rings .043 .043 3.0 mm
  • Comp Cams 7/4 Swap Steel Billet Roller Cam
  • Comp Cams Hippo Solid Roller Lifters
  • Rollmaster Billet Timing Set with IWIS Chain and Torrington Bearing
  • GM Chrome Timing Cover and Billet TDC Pointer
  • ATI Super Dampener Dampener, TCI SFI Flexplate and ARP Bolt Kit
  • AFR 245cc 1137-TI 2.125-1.600″ 100% CNC Aluminum Cylinder Heads
  • PAC Racing 1.550″ Roller Springs and Titanium Retainers
  • Cometic or Fel MLS Severe Duty Head Gaskets
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • Manley or Trend 7/16 x .165″  Taper Wall Exhaust Push Rods
  • Jesel Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Oil Pump and Tig Welded Pick Up Tube Kit
  • Moroso 7 Quart Oil Pan with Pro Series Windage Tray
  • AFR CNC Match Ported Intake Manifold and Jomar Spacer
  • Holley or QFT 1050 cfm Carburetor
  • MSD Crank Trigger, Distributor, 8.5mm Wires, NGK Plugs

OPTIONS

Steel Billet Main Caps
+ $  450.00
Callies Magnum 4340 Internally Balanced Crankshaft Heavy Metal Needed
+ $1275.00
Comp Cams HIPPO Roller Lifters with Solid Bushing (No Needle Bearings)
+ $   875.00
Isky Red Zone EZX Roller Lifters with Solid Bushing  (No Needle Bearings)
+ $1025.00
Jesel One Piece Belt Drive Block Machining Included
+ $   875.00
Moroso 22171 Billet Oil Pump With Integral Pick Up
+ $   275.00
Moroso Complete Vacuum Pump Kit Dyno Tested with Engine
+ $1275.00

Dyno Tested and Tuned with 112 Fuel   • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar