SBC 434ci 780 Hp Bracket Race Engine

SBC 434ci 780 Hp Bracket Race Engine

$17,975.00 Turn Key

Dart Little M2 Splayed Cap Raised Cam Race Block, AFR 245cc CNC Ported Heads, Scat Crank and H Beam Rods with ARP 2000 Bolts, Wiseco 14:1 Lil Quick 16 Pistons, 043-043-3.0 mm Rings, Comp Cams 7/4 Swap Cam, HD Hippo Lifters, 7/16 x .165″ Intake, and ½ x .200″ Wall Exhaust Trend Push Rods, Jesel Pro Series Shaft Rockers, 1050 cfm Carburetor, Spacer and MSD Ignition comes as a Turn Key One of the Best Dyno Tested Ready to Run Race Engines Available

9.000″ Deck |4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 780 Hp @ 7400 rpm


  • Dart Little M2 Steel Billet Raised Cam Splayed Cap Race Block
  • Dart Coated Cam Bearings and Block Small Parts Kit
  • Scat L-Weight 4340 Internally Balanced Crankshaft
  • 4340 Steel SD H Beam Bushed Rods with ARP2000 Rod Bolts
  • Clevite or King Race Bearings
  • Wiseco Quick 16  Gas Ported Coated Skirt 14:1 Forged Pistons
  • JE or Total Seal .043 .043 3.0 mm File to Fit Ring Set
  • Comp Cams or Erson 55 mm 7/4 or LS Swap FO Roller Cam
  • Competition Cams or Erson HD Bushed Hippo Solid Roller Lifters
  • Cloyes Timing Set with Black Z Chain and Torrington Bearing
  • Cloyes 2 Piece Aluminum Timing Cover and Billet TDC Pointer
  • ATI Super Dampener SFI Approved Harmonic Balancer
  • AFR 245cc 1137-TI 2.125-1.600″ 100% CNC Aluminum Cylinder Heads
  • PAC Racing 1.550″ Roller Springs and Titanium Retainers
  • Fel Pro Head Gaskets
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • Trend 7/16 x .165″  Intake and 1/2 x .200″ Wall Exhaust Push Rods
  • Jesel Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Oil Pump and Tig Welded Pick Up Tube Kit
  • Moroso Pro Series Windage Tray 7 Quart Oil Pan
  • AFR CNC Match Ported Intake Manifold
  • Holley or QFT 1050 cfm Carburetor and Jomar 2″ Spacer
  • MSD Billet Distributor, 8.5mm Wires, NGK Plugs


JE AP or Hell Fire Ring Set
+ $ 150.00
Isky Red Zone EZX Ultra Duty Roller Lifters with Solid Bushing  (No Needle Bearings)
+ $ 575.00
Cloyes 2 Piece Aluminum Timing Cover
+ $ 125.00
Cometic MLS (Multi Layered Steel) Head Gaskets
+ $ 95.00
ATI SFI Approved Super Damper Balancer Specific Honed to Fit
+ $ 245.00
Moroso 22171 Billet Oil Pump With Integral Pick Up
+ $ 275.00
Moroso Complete Vacuum Pump Kit Dyno Tested with Engine
+ $1075.00
PowerMaster Ultra Series Starter Kit With ARP 12 Point Bolts, Shims and Warranty
+ $ 225.00
TCI SFI Flexplate and ARP Fasteners
+ $ 125.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar